NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Timothyah2's avatar
Dec 30, 2022
Solved

Network switch not working with Modem/Router

Hello,

I recently attempted to install a network switch on my Netgear modem/router. My house is pre-wired so it was an easy plug and play. I had to dismount an TV to connect to ethernet and initially when I plug everything up it was working fine. Now my modem/router recognizes that something is plug into the Ethernet port (the number 2 port is lit and flashing) but my devices connected to the switch so not have internet. Furthermore, initially (when things were working) I could see the switch in my nighthawk app under devices. Now I dont see a hard wired device at all. I am confused because visually the router recognizes that something is plugged in but the nighthawk app doesn’t and I think this is why I am not getting an internet connection to the switch. Does anyone have an idea of why this could be happening? Thanks!
  • plemans's avatar
    plemans
    Dec 30, 2022

    1. AX6000 is a speed, not a model. Do you have the CAX80? 

    2. did you try other ports on the router? 

    3. some devices are more picking with sketchy cables. If you move the switch to right next to the router and connect it with a good quality cable, does it work? 

5 Replies

    • plemans's avatar
      plemans
      Guru - Experienced User

      1. AX6000 is a speed, not a model. Do you have the CAX80? 

      2. did you try other ports on the router? 

      3. some devices are more picking with sketchy cables. If you move the switch to right next to the router and connect it with a good quality cable, does it work? 

      • Hey sorry for the confusion. Yes I have the CAX80. I did What you recommended and moved the switch next to the router and it worked so I’m assuming the cable may be bad. Thanks for your help!