Hi Guys
Having a real issue getting my nighthawk VPN to use my public static IP address when I connect to the VPN, has anyone managed to get this work properly? annoying how I cant do much confiuration for the VPN server on the nighthawk as well. I have set the option in tunnelblick to push all traffic through the VPN as well.
I am using Tunnelblick as suggested by Netgear and using MacOS sierra, ifocnifg output below
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 3c:15:c2:df:85:3a
inet6 fe80::ba:471d:2dc3:ae48%en0 prefixlen 64 secured scopeid 0x4
inet 192.168.43.104 netmask 0xffffff00 broadcast 192.168.43.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
en1: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:49:8e:20
media: autoselect <full-duplex>
status: inactive
en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:49:8e:21
media: autoselect <full-duplex>
status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 0e:15:c2:df:85:3a
media: autoselect
status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
ether 66:4e:99:7c:0f:af
inet6 fe80::644e:99ff:fe7c:faf%awdl0 prefixlen 64 scopeid 0x8
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 72:00:04:49:8e:20
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 5 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 6 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::937d:5d62:5814:4e2f%utun0 prefixlen 64 scopeid 0xa
nd6 options=201<PERFORMNUD,DAD>
tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether de:88:7a:4b:9a:ef
inet 192.168.89.8 netmask 0xffffff00 broadcast 192.168.89.255
media: autoselect
status: active
open (pid 639)
Cheers, Nikolai
