WNDR 4300 loses 2.4 internet, but 5.0 works
WNDR 4300 randomly looses internet connectivity only on 2.4 side. It will show that it is connected by it has no internet. 5.0 side always works. I also connected directly to router with an ethernet cable and it works fine. I have the problem on all devices. I have tried a hard reset and that works sometimes, sometimes it doesnt. I have had this problem on and off for months and seems to be occuring more often. It shows I have the most up to date firmware also.
Re: WNDR 4300 loses 2.4 internet, but 5.0 works
> WNDR 4300 [...]
WNDR4300[v1] or WNDR4300v2? Look at the product label.
> [...] I have the most up to date firmware also.
As always, an actual version number would be more useful than your
opinion of what's "most up to date" today.
> [...] It will show that it is connected by it has no internet. [...]
"It"? _What_, exactly, shows what, exactly, how, exactly? Does the
router complain, or some wireless client device, or what?
One simple explanation for sporadic operation on one radio band would
be (sporadic?) radio interference -- neighbors' wireless routers or
One possible solution to such a problem would be to change the radio
channel which your router uses in the 2.4GHz band. Visit
http://netgear.com/support , put in your (actual) model number, and look
for Documentation. Get the User Manual. Read. Look for "Basic