- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
How to Update POE-firmware on M5300-POE
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How to Update POE-firmware on M5300-POE
Hello community,
my stack consists of 7 devices mixed with M5300 and GSM7352Sv2.
I noticed that two of the three M5300-POE have an older POE-firmware (1.4.0.3 instead of 1.7.03).
I couldn't find a way to update them.
All stack-members are at the firmware-version 10.0.0.53, which is unfortunately the last possible firmware in a mixed stack.
I expected that everything would be brought up to date with the update and not only the "main-firmware".
How can I get them to the new POE-firmware.
Any idea?
Best regards,
Eli
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: How to Update POE-firmware on M5300-POE
Hello John
I've already tried that before with no succees.
But on your word I'll tried it again and also restarted the switch
-> but it failed again.
POE-firmware still on version 1.4.0.3
As I mentioned: The main-firmware of all stacks currently is the same: 10.0.0.53
-> only POE-firmware differs ...
Any other idea?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: How to Update POE-firmware on M5300-POE
If that is the case then we may need to remove the switch from the stack and manually update its firmware in order for it to be running on the same versions as the others.
You may also need to reboot all the switches on a stack once you reconnect those switches so that it will re-elect its master.
Regards,
John
NETGEAR Community Team