NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear M43000 DHCP Server Setup
I need a simple network setup where the I have a single private network of equipment that all need to be assigned an IP.
All the equipment is managed from a host PC with with two separate LAN cards. One LAN for the company network, which should not have access to the private network of equipment and the second LAN for my private network.
I've have stepped through the DHCP server configuration settings as described in the manual but failed to make it work.
2 Replies
Replies have been turned off for this discussion
Welcome to the community! 🙂
Let me share the article below and use it as your guide:
Also, I found this old community thread here. Kindly access and read it as it might help you as well.
Regards,
DaneA
NETGEAR Community Team
Hi DaneA,
Thanks for the reply. I have gone through the guide you pointed to. I must be doing something fundamentally wrong as I have gone through several configuration and have yet to come up with a working solution.
I do see after enabling the DHCP server on the switch and looking at the DHCP server statistics. The switch in indeed getting IP request from clients (DHCPDISCOVER increments). But the according to the switch DHCP Server Statistics DHCPOFFER no IPs are being sent.
Thanks in advance for the help,
Rick
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
