NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear switch VLAN PCP support
Hi there, I'm wondering if theGS108 Netgear switch has hardware support for the PCP in the VLAN tag? My guess is no, but I want to hear from the experts here. Below is my experiments: Setup: ...
Hi newgear12,
I cannot reproduce the situation you mentioned.
Could you help to provide the following items? It will help to reproduce the situtation. Thanks
1, provide 2 MAC address of the 2 PCs that send UDP streams. Indicate which PC you expect to get higher priority and bandwidth.
2, enable mirror features on GS108Ev3. Send the 2 UDP streams into GS108Ev3 as you did. Use Wireshark to capture 2 UDP streams from GS108Ev3. Provide packet capture file.
3, provide topology chart, which PC is connected to which port, including sender PCs and receiver PC.
4, provide your configuraiton file
Hi WilsonS, thanks for the reply.
What I tried to experiment with is to reproduce the setup shown here:
https://github.com/NXP/dds-tsn/
I wanted to use the Netgear switch in the setup instead of the specific TSN ethernet switch. But the prioritization didn't work, which I described earlier.
Sorry I cannot provide the information you asked in short term, because of other urgent things.
But I'll be interested to know if you can create two iperf streams with PCP & link speed limit configuration as described in the repo, and see the bandwidth difference of the two streams.
Will provide you the documents once I get around working on it again.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
