This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I am using the R7000 router at my home for some time now. Since the beginning the speed on the 5ghz band was very slow. First I thougt it might be a problem of my Iphone, but now I have to see that Iphone, Ipad and my laptop computer have severe speed limitations when using the 5g network. With the 2.4 I get download speeds aof 8Mbit, with the 5g no more thant 1Mhz.
Any suggestions ? I always used the current firmware, but saw no difference. There are not other 5Ghz networks in the house (I already checked).
Others have had issues with the 5Ghz channels with the version of firmware you have, they seem to have luck actually going back to the previous version, 1.0.4.28. You can get it here downloadcenter.netgear.com/en/product/R7000
Also ignore iphone for now and see if you have 5ghz n or ac client and see the link rate for actual throughput as well signal strength.
In Iphone post a snapshot on 2.4ghz signal DB and 5ghz DB using the netgear analytics software. Also the graph which tell how many signal interferance in that area.
I am using the devices in the same room with a clear line of sight of perhaps 5-8 meters. My ISP is a cable line (Vodafone Germany) with 32Mbit downstream, nevertheless I do not have any speed limitations when using the 2.4ghz signal.
I did not try the firmware you mentioned, I am currently using V1.0.4.30_1.1.67 (no new one availabe, at least thats what the webinterface tells me).
I do not find a netgear analytics software on the app store, do you mean the netgear Genie ?
Signal strength of my 2.4ghz network (using inSSID) is -43, for the 5ghz -45 and -89 on the two displayes channels. The link rate for the 2.ghz network is 144Mbit, for the 5ghz 300-360Mbit.
I just did a speed test on an internet website, I get 32Mbit downstream using 2.4gz and 2.7Mbit using the 5gz one ...
Others have had issues with the 5Ghz channels with the version of firmware you have, they seem to have luck actually going back to the previous version, 1.0.4.28. You can get it here downloadcenter.netgear.com/en/product/R7000
I will try downgrading first, but I am not really expecting any differences. I have the problems since I installed the router 1 year ago (with older firmwares ..) . Since now I solved the problem with ignoring the 5ghz networks and using the 2.4ghz ones, but I am not willing to accept that any longer.
I downgraded to the .28 firmware and the 5ghz rates improved dramatically. After that I upgraded to the public beta, and it is working as well. So it seems to be a software issue with the current firmware. I hope my problems are solved with the upcoming firmware.
As to your previous question, it is usually recommended to enter all the parameters from scratch. If you need to record what your settings are for reference, you can go to each page in the Genie web interface, and in your browser, save each page you want to save to your PC. In Firefox it is "File -> Save Page As..."
It's your phone. My iPhone has been Doing that recently as well on 5ghz it hits a brick wall when I speed test it. It all of a sudden stops at 30mbps. I pick up my android device and run the same test and get speeds at 90+Mbps. It's your phone for sure. I thought it was my router too.
