R7000: UPNP Renderer not visible when connected via WiFi

[slapi2000]

Hi all,

I use the R7000 as a router and have the problem that my UPNP renderer (Denon DNP-F109) is not visible if connected via WiFi (via Ethernet, everything works fine).

Can anybody give me a hint what to do here?

I have switched on DHCP and UPNP in the configuration. All UPNP devices (renderer/server/controller) are in the same local 192.168.* network.

Many thanks

Stefan

[JamesGL · Accepted solution]

Hi Stefan,

Please perform a reset on the device and check again if still the same problem.

[JamesGL]

Hi Slapi2000,

What is the IP address of your renderer?

Can you ping the IP address?

Do you have other devices working with wireless?

What is the firmware version of the router?

[slapi2000]

Hi,

IP address: 192.168.1.2 (static assignment)
Ping: yes
Other devices: yes, few mobile phones/tablets (none of which with any UPNP role).
Firmware: V1.0.6.28_1.1.83 (the bug is there since a number of releases - I have been hoping since a while this gets fixed at some point)

Best regards,
Stefan

[JamesGL · Accepted solution]

Hi Stefan,

Please perform a reset on the device and check again if still the same problem.

[Retired_Member]

Have you tried address reservations?

[slapi2000]

Hi,

having tested for a while, I can confirm that the router reset did solve the issue. Many thanks for the hint.

Best regards,

Stefan

[JamesGL]

Hi slapi2000,

Glad to know it works now.