I'm plugged in via ethernet with my gaming desktop. Just bought this 5 days ago and was working good the first day. Been having problems with it since then with it throttling my speed. When I restart it while it is pulsing white my speeds are back to normal. Then after it is all done restarting and returns to its amber light my speed goes back down and is inconsistent. Randomly every 30 minutes or so it will pulse white and then I will get my speed back for about 1 minute to 30 seconds then will go back to the amber light and my speed will then be throttled.
What Firmware version is currently loaded? What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What is the size of your home? Sq Ft? What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite📡
Try disabling the following and see: Armor, AX mode on the RBR and Set 20/40Mhz Coexistence to 40Mhz only. Set CTS to 2347. Save settings and reboot the router and satellite(s). Under Advanced Tab/Advanced Settings/Wireless Settings
