bricked RBR50

[cpapad]

Hi all.

I have a RBR50 which up until recently was working ok but now seems to be bricked.

I also have an RBS50 satellite and an RBS0Y Outdoor - both of which appear to go through their boot sequences (lights) just right.

The current status of the RBR50 however is:

- the top ring is not lit at all

- the Power LED is hard green

- no amount of power cycling changes the LED status

- have factory reset (paper clip 30 seconds )

- the Wireless is down

- the wired / ethernet ports are also dead

I cant get any PC or Mac to bring up the ethernet port

I have changed CAT 5 cables

I have swapped the RBR50 power supply with the RBS50

I cannot get to the TFTP to upload a new firmware file, cause I cant connect to any of the ethernet ports. Nor will a mobile see the wifi network.

The only indicator that it is powered up is the green power LED - there are no other indicators to signify that its doing 'something'.

It seems to be dead - Is there anything that I have missed?

thanks in advance.

[CrimpOn]

If you do the "30-30-30", what happens to the Power LED?

(press paperclip for 30 seconds - a LONG time...

continue to hold paperclip and press power button to OFF

continue to hold for 30 seconds - getting really tired of this

press power button back on,and

continue to hold for 30 seconds

Does the Power LED ever blnk amber?

[cpapad]

Thanks CrinmpOn for the reply.

I just tried the 30-30-30 and still no cigar..

At NO time did the LED ever go amber. Only "off" when I switched it off whilst holding down the Reset and then back on, but it just goes instantly green, not even a momentary amber or red..