NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
I have had this issue since upgrading my internet connection to 2.0Gbps
I have had this issue since upgrading my internet connection to 2.0Gbps. Performance across the router from WAN to LAN (download) is 200-300Mbps. After trying many settings, enabling QoS without enab...
- Test was still running this AM without perf /QoS issue so static ip on RAX200 "fixed" the issue.
Yes, I have tested every combination, and I understand the 1Gbps LAN will limit perf, this is expected. I have the 2.5G WAN port enabled and connected to my 2.5G switch and 2.5G Modem (via ER707-M2) which can get 2.0+G as measured on my B100 Mini PC via SPEEDTEST. I disabled DoS protection on the RAX200 on a hunch, LOL. So far so good. Theory here is the DoS protection is identifying the speed test as DoS and......throttling it.
Sad. đ
[Internet connected] IP address: 192.168.0.100, Monday, Jan 29,2024 11:55:51
[DHCP IP: (192.168.3.11)] to MAC address B8:3E:59:2A:BF:75, Monday, Jan 29,2024 11:55:49
[Time synchronized with NTP server] Monday, Jan 29,2024 11:55:47
[Internet disconnected] Monday, Jan 29,2024 11:55:46
- You're using a router after router which creates a double NAT situation. Put your modem/router in bridge mode. You should only have one router doing the routing in your network.
Ya, but I loose Bitdefender doing that.
Is this with the RAX router directly connected to the CM series modem only unit? No router here.
Also be sure to check the speed with a ethernet connected PC to the back of the CM series mode as well.
Are there any flow controls on that MS model switch? I would not put a switch in between the CM series modem and the RAX200. The router should be only item connected behind the modem.
Please post a copy and paste of the modems connection status and event log page.
https://kb.netgear.com/30007/How-do-I-obtain-the-cable-connection-information-from-a-NETGEAR-cable-modem-modem-router
https://kb.netgear.com/30008/How-do-I-view-or-clear-the-event-logs-on-my-NETGEAR-cable-modem-or-modem-routerThe Modem is fine, 2.0+Gbps connected to the 2.5Gb switch which is where I'm testing RAX200 WAN port. Looks like the RAX200 has problems renewing IP address, many requests to the ER707-M2, then RAX200 disconnects, reconnects and after that the QoS is dead until disabled/reenable. I have a bash shell copying a big file once a minute from the Pi also connected to the 2.5Gb switch on the WAN side, logs the time and copy time. Logged a connection error when the RAX200 disconnected, then slow copies.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
