Forum Discussion

Guide

Apr 26, 2014

HELP. RN Pro Pioneer Edition) Not turning on, but...

Last night, the NAS restarted itself (within 1 minute) after I shut it down for the night. This has happened before maybe just a handful of times. The solutions in the past as been to use turn switc...

Booting

adamroutier

Aspirant

Jan 04, 2016

Hi all

I am also having this same issue. I turned mine off when going on holiday for a couple of weeks and now it will not turn on at all.

I am not familur with which power supply i should order. Would this be the correct one?

http://www.silverstonetek.com/product.php?pid=253&area=en

Thanks in advance

Thanks

Adam

StephenB

Guru - Experienced User

Jan 04, 2016

That one might fit, but the original supply was a Seasonic SS-300SFD. Connectors are a bit different (not sure if Netgear custom-ordered or if the supply I/O changed with the times). You'll want a short 24-pin extender and an SATA->4 pin molex adapter if you go with the current Seasonic. Both are readily available and inexpensive.

adamroutier
Aspirant
Jan 04, 2016
Hi StephenB

Thanks for yous help. I have found the Seasonic on amazon Uk.
Could you do me a favour and post links to the 24-pin extender and the SATA 4 pin molex adapter. Im struggling with these...

Thanks in advance

Adam
- StephenB
  Guru - Experienced User
  Jan 04, 2016
  Perhaps
  
  two of these: http://www.amazon.co.uk/StarTech-inch-Power-Cable-Adapter/dp/B004GSH9KQ/ref=sr_1_3?ie=UTF8&qid=1451920070&sr=8-3&keywords=sata+to+molex
  
  one of these: http://www.amazon.co.uk/StarTech-com-2-01-Power-Extension-Cable/dp/B000FL60AI/ref=sr_1_1?ie=UTF8&qid=1451920126&sr=8-1&keywords=24+pin+atx+extension
- Sandshark
  Sensei
  Jan 04, 2016
  I got the extender on eBay and actually moved the Molex connectors from the old supply to the new instead of using adapters. It made the installation "cleaner" -- less excess cable.
  - adamroutier
    Aspirant
    Jan 18, 2016
    Hi all
    
    All my parts have arrived but im struggling to get the power supply out. Are there instructions anywhere on how to do this?
    
    Thanks in advance
    
    Adam