NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
FVS336G VPN with L2TP/IPSec behind a NAT Router
Hi there,
anybody having experiences with FVS336G and L2TP/IPSec behind a NAT Router?
I already tried with a certain Zyxel model, but finally it wasn't able to make it, so i threw 350,- out of the window...
THX for your ideas,
Jorge
1 Reply
Hi JEstrellas,
Welcome to the community! :)
Does you NAT router have a DMZ port? If it has, connect the FVS336Gv3 to the DMZ port of your NAT router and configure WAN-DMZ rules if needed.
If ever your NAT router does not have a DMZ port, you may try to open ports on the NAT router to allow L2TP VPN or IPSec VPN.
If ever you have already tried the suggestions I mentioned above and your NAT router is a combination of modem and router, you might need to configure it to full-bridge mode so that the FVS336Gv3 will be the main router which would be really suitable for L2TP VPN and IPSec VPN.
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
