How to set port mirroring for GS110TPv3

[MayBeYas]

Hi all,

I cannot find Port Mirroring setting page on https://192.168.0.239

Monitoring tab shows only "Logs".

I tried log on as "NETGEAR Insight Mobile App and Insight Cloud Portal" but I couldn't find too.

How can i show Port Mirroring setting page?

Best Regards,

Yas

[schumaku]

Hi Yas,

What is the GS110TPv3 firmware version in place?

Not sure this moment if (by mistake?) the port mirroring might be disabled if the device is Insight managed.

-Kurt

[MayBeYas]

Hi kart 

Thank you for reply.

Firmware version is 7.0.1.20

"might be disabled if the device is Insight managed."

I thinmk so too. Insight seems to obstacle Port Mirroring because I used it two years ago.

Should I buy subscription to use Port Mirrorring? or Should I update the firmware?

Best Regards,

Yas

[schumaku]

Yas,

On the Insight managed swiches I have at hand, Port Mirroring is available from Insight (certainly from theWeb UI), but not from the local Web UI while in Insight mode.

Start with putting up a current firmware to the switch from https://www.netgear.com/support/product/gs110TPv3.aspx -> Downloads

While I love Insight, just for a single switch it does not always make real sense.

Regards,

-Kurt

[MayBeYas]

Hi Kurt,

Okay I will try updating firmware and using Insight.

Thanks.

Best Regards,

Yas

[schumaku]

Port Mirroring must bei available in pure local Web management while not linked to Insight, too

[MayBeYas]

To all supporters
Thank you for your comment . and I’m sorry for late reply.
Finally I can use port mirroring function by Insight setting .
It was very complicated to setup insight registeration.
Anyway thanks to all supporters.
Best Regards,
Yas