NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Antivirus scanner definition file update failed
ReadyNAS 212 OSversion 6.10.3 Since a couple of days (starting July 5th) my virus definition file update failes.. stating check internet-connection ; my internet connection is fine because the rea...
I kept getting errors while executing command: 'systemctl status clamav-freshclam.service' ; see below
root@Geldrop:~# systemctl status clamav-freshclam.service
● clamav-freshclam.service - ClamAV virus database updater
Loaded: loaded (/lib/systemd/system/clamav-freshclam.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Wed 2020-12-23 14:33:45 CET; 15s ago
Process: 6263 ExecStart=/usr/bin/freshclam --quiet (code=exited, status=1/FAILURE)
Main PID: 6263 (code=exited, status=1/FAILURE)Dec 23 14:33:45 Geldrop systemd[1]: Starting ClamAV virus database updater...
Dec 23 14:33:45 Geldrop freshclam[6263]: ClamAV update process started at Wed Dec 23 14:33:45 2020
Dec 23 14:33:45 Geldrop freshclam[6263]: main.cvd is up to date (version: 59, sigs: 4564902, f-level: 60, builder: sigmgr)
Dec 23 14:33:45 Geldrop freshclam[6263]: daily.cld is up to date (version: 26026, sigs: 4328586, f-level: 63, builder: raynman)
Dec 23 14:33:45 Geldrop freshclam[6263]: bytecode.cvd is up to date (version: 331, sigs: 94, f-level: 63, builder: anvilleg)
Dec 23 14:33:45 Geldrop systemd[1]: clamav-freshclam.service: Main process exited, code=exited, status=1/FAILURE
Dec 23 14:33:45 Geldrop systemd[1]: Failed to start ClamAV virus database updater.
Dec 23 14:33:45 Geldrop systemd[1]: clamav-freshclam.service: Unit entered failed state.
Dec 23 14:33:45 Geldrop systemd[1]: clamav-freshclam.service: Failed with result 'exit-code'.The following I did after reading the following web-page (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=972974):
stopping clamav: 'systemctl stop clamav-daemon'stopping clamav freshclam: 'systemctl stop clamav-freshclam'
adjusting member 'usr.bin.freshclam' in dir: /etc/apparmor.d ; adding 'capability dac_override,' and 'capability chown,'
capability setgid,
capability setuid,
capability dac_override,
capability chown,removing all file from dir: '/var/lib/clamav' (bytecode ; daily ; main ; mirrors ; antivir)
starting clamav : 'systemctl start clamav-daemon'
starting clamav freshclam: 'systemctl start clamav-freshclam'
starting 'clamav freshclam' takes a while (about 2 minutes, I guess) and afterwards it looks like the normal databased-updater is working again.... lets see what happens the coming days...
regards
It wasn't actually me that detailed the steps; that honour goes to @NormanP and @StephenB.
You cannot use a Windows command line (not directly anyway) to enter the commands. These have to be entered into the Linux shell on the ReadyNAS. The only way to do that is to enable SSH in the Administrator pages and then log in to the ReadyNAS as root. On a Linux machine the command (in a terminal) would be:
ssh root@<IP Address of the ReadyNAS>
You will be prompted for a password; use the one you set for the Administrator.
On Windows or Mac there are SSH clients, which should allow you to do the above, but they tend to be a graphical tools with fields to enter the key parameters, such as IP Address, username and password. I don't use one so I can't help you there.
I too was contacted by Netgear, but since I have used the manual fix, my logfiles are probably of no use to them. I'm glad that you've agreed to help? (If anyone else on here is asked; please say yes.)
I've already done everything the engineer requested - sent him my log files, enabled the Secure Diagnostic Mode and provided the port #, so now it's just a matter of waiting for a fix. I think they like looking at my machine since I haven't done anything to try and fix the problem. But the downside, of course, is that my machine is now on and without antivirus protection while I wait. Hopefully it won't be much longer.
Sorry. I cheated and edited my post when I realised that I hadn't read your post properly. I hoped you hadn't got round to reading it but you caught me out. :manembarrassed:
Yeah, I can be quick when I'm doing other things on my computer :smileywink:
Interesting... I just now got a second antivirus error message today. Maybe there are some Netgear engineers working on the problem. I've never gotten 2 error messages in one day.
Hey, my ReadyNAS has automatically updated the antivirus software daily since late on the 26th! Looks like the Netgear engineers have fixed the problem for me. Hopefully, it has been fixed for others, too :)
Unfortunately after an unexpected powerdown, this issue reoccurs again. So overall it is not solved yet by netgear.
I executed my steps which I thought did solve my issue, and I hope it will do it again although it seems to resolve it until my powerdown...
netgear, I hope you will find the real solution for this issue
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
