NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
admin page keeps loading in a loop netgear nas 104 after update Version 6.10.5
admin page keeps loading on in a loop netgear nas 104 after update Version 6.10.5 cleared cache on all browsers did not help,did a reset on the os did not help, my unit is a ReadyNAS 104 4 ba...
Had the same problem - Do you have SSH access? If so, your unit isn't "technically" a brick. You should downgrade right away to 6.10.4. (I did that and the problem went away). Contrary to other posts - it has NOTHING to do with the browser version you're using to access the unit - it happens on all browsers - it's a flaw in frontview.
Here are the instructions for the ARM unit (RN102):NB: (you MUST be ssh'ed in as 'root'):
cd /root wget http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNASOS-6.10.4-arm.zip unzip ReadyNASOS-6.10.4-arm.zip echo /root/ReadyNASOS-6.10.4-arm.img > /etc/.flash_update reboot
There is a hotfix that needs to be applied to that release and it will automatically be applied if your NAS settings permit hotfixes to be automatically applied... otherwise - do as you see fit.
Just ignore any further updates to 6.10.5 until they get their act together.
No matter what I try I can't update to the prior firmware. I now have a brick on my desk. When I try to load the binary .img file I get a communication error. HELP
Was having the same issue, I used the usb recovery tool method and it worked perfectly there's a thread and instructions somewhere on here search for it
I'm not quite sure how, but I was finally able to revert back to 6.10.4. Only problem was, it deleted everything I had. But, at least I don't have a brick anymore. I'm not sure how many family photos are gone forever though. Thanks for the reply
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
