how to manually format the drive（m.2 slot） and mount it (from ssh).

[Syou21]

(My native language is not English, please forgive me for using Google Translate to write these things)
RN628x has an m.2 interface, I want to install an ssd for caching, how to use ssh to mount the ssd. I am not familiar with Linux, so I beg for some mounting commands.

PS: When I checked the PCI of my RN628X with SSH, I found that the lspci command didn't work, so I ask for help.

root@AAR-TDB:~# lspci

-bash: lspci: command not found

root@AAR-TDB:~#

[StephenB]

---

@Syou21 wrote:

(My native language is not English, please forgive me for using Google Translate to write these things)

---

I hope google translate translates my reply correctly!

It'd be easier to use two bays for SSDs and set up ReadyTier.  https://kb.netgear.com/000060806/ReadyNAS-OS-6-10-Data-Tiering

I think installing a drive in the m.2 slot might void the warranty.

There is one poster here who did what are suggesting.  He had to make several changes to the normal ReadyNAS software setup (which he outlined, but didn't give all the details).  https://community.netgear.com/t5/New-ReadyNAS-Users-General/Add-SSD-drive-s-to-RN528X/m-p/1805740#M3...