mDNS / Bonjour not working
Hello Community, I have a Netgear PR460X router with 3 M4250-26G4F-PoE+ daisy chained on 10gSFP. I have 5 VLANs : 1(MGMT and device traffic), 20(testing(, 25(Guest Network), 100(SIP ...
Re: Mini ups for netgear orbi
Not clear whether MoePA found a suitable UPS for his ORBI. If someone has recommendation, I am trying to solve essentially the same issue - I would like a very small UPS for an ORBI satellite d...
RN 102 Unable to see NAS drive
So this morning, I couldn't access my ReadyNAS 102 from my Windows 10 PC - the power ON LED was flashing regularly, the activity light was on solid but the Disk 1, DIsk 2 and Backup LEDs were off. Th...
Re: Trying to view eMTA Event Log causes reset on my CM2050V modem
I happened to click on the event log while troubleshooting and my internet locked up. That's when I noticed that my modem restarted. Even after a restart it's still doing the same thing. Is there sti...
Can I use Netgear GS724t for comcast telephone network?
M4250 pinned at full fan speed
Hi. Just picked up a M4250-10G2XF-POE++ It came with firmware 13.0.4.8 and I figured I should throw in the latest firmware (13.0.4.18). It updated just fine, but now the fan speed is pinned ...
Where are my wired devices?! RBS850
Hello, I recently purchased and setup an RBS850 system. One satellite. I'm having some strange difficulties with ethernet-wired devices to the satellite. They are getting DHCP addresses,...
Disable external Access
How do you disable http access to the router. When I type http://myip into a browser, I get a login prompt to routerlogin. How do I disable that?
ATT Nighthawk M6 Pro Ethernet always isolated?
I am trying to make some services available through the wired network port, but am unable to access any wired devices while wirelessly connected to the M6. Isolation mode is turned off in the web GUI...
EX2800 log in
I purchased a EX2800 extender some time ago. Had no issues setting up and using it. I recently upgraded to a newer router. I followed the usual and connected the extender through WPS with no problem....
Re: New - RBR850 / RBS850 Firmware Version 7.2.6.31 Released
Something I did find with Auto Update and distances with RBS and some units not updating while others did. If the RBS do not have a good signal from the RBR when wirelessly connected, then there is a...
Re: New - RBR850 / RBS850 Firmware Version 7.2.6.31 Released
Are the RBS750s on the same system as the 852 or are they on a separate system? FYI, the 750 series FW was just put up early this morning. So the RBS750 may have not seen anything until today or la...
Re: New - RBR850 / RBS850 Firmware Version 7.2.6.31 Released
Select here: Ok, Should be ok, however would be good to be all on same FW version since there both now at v.31. Update when you can. Enjoy.
Re: New - RBR850 / RBS850 Firmware Version 7.2.6.31 Released
Are the RBS750s on the same system as the 852 or are they on a separate system? FYI, the 750 series FW was just put up early this morning. So the RBS750 may have not seen anything until today or lat...
Re: New - RBR850 / RBS850 Firmware Version 7.2.6.31 Released
I finally manually updated to V7.2.6.21 a few weeks ago since it never showed up in the firmware update interface. Now I’m not seeing V7.2.6.31, I’ll give it a few days before updating manually.