NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Untag VLAN
Looking for some guidance on "untag VLAN" as suggested by Google. I have an ISP router from Movistar with a Fiber Optic connection and they have suggested I do not use Bridge mode on their router as its likely to cause some issues. ISP Router has 3 VLANS 6, 3, 2 2 for IPTV 6 for Data 3 for VOIP Have installed a Google HOME NEST ROUTER and 3 points Google supports VLAN tag values of 2, 7, and 10 Performance is not great and Google suggested I buy a Managed switch to UNTAG the VLANS. i bought a Netgear managed switch GS305E I am now swimming in deep water! How do I "UNTAG" the VLANS in the switch. Have downloaded the Netgear Insight APP but am now strugglingAccessing GS108Tv2 via Mobile App
Hi Guys, I have my switch connected to my LAN but I am unable to get the Android App "Netgear Insight" to connect and see the switch. The switch is listed within the app, but when I try to access it, it says the switch is unavailable. Does the app assume that the switch is on a specific subnet? I believe the manual says to use the .0.x subnet, but I have it on the .1.x subnet. Could this be why the app can't access the switch? If not, can anyone suggest any other way to get to manage the switch via my Android? Thanks!Configuring Static IP on one interface and NAT it to internal VLAN
Hello! I am not very much familiar with Netgear managed switchs. What I would like to do is that I want to configure a static IP as an external IP 84.x.x.x on the router on any one interface and create a NAT to one of the internal VLAN. Basically, when I connect a PC to this swtich then it gets IP address like 192.168.1.10 issued from an internal DHCP server but the traffic should go from the external IP 84.x.x.x and received on the same IP NAT internally to IP 192.168.1.10. I am not sure if this is possible to do this on a managed switch or not. So, please help me on this. Thanks AnkitGC110 & GC110P - Cloud Server is Unreachable
Here goes nothing for my first post: Purchased these yesterday and they appeared to be the "latest & greatest" and fit a particular need for a client. I got the GC110 setup yesterday and it was connecting to the Cloud just fine. Fast forward to today and neither the GC110 or the GC110P will connect to the cloud. I have reset both at least 3 times and recreated networks and the issue persists. I finally got it to the point that I could see them locally in the Insight app but they are still not connecting to the Cloud. Please see attached photo for issue. I also attached logs from both.Insight Management App is Perfect for your Business - Find Out Why - NETGEAR Blog
I'd like to draw your attention to a NETGEAR Blog that provides a few great reasons that our Insight Managed Switches, AP's and ReadyNAS are great for SMBs. Many small businesses, especially while in startup or growth mode, don’t necessarily have the adequate resources to hire someone to manage their IT infrastructure. With these resource restraints, it often falls upon the owner to make sure their network is running smoothly – along with every other aspect of the business. Are Insight Managed products right for you? Let us know what you think in the discussion below.
