NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
LB2120 LB1120 send email instead of sms
Hello, Have written before but never had a reply. I need my LB2120 LTE modem to send me a message when it fails over to 4g but I cannot find a data plan that also will send a text so it would be great if we had the option for sending an email. Has anyone else found a carrier that sells a pay as you go data plan that will also send a sms message? Thank You, TroyFeature request - LB2120 LTE Router -use mobile broadband by default and failover to wireline
How do I submit a feature request? Currently my LB2120 LTE router can "Use wireline broadband by default and failover to mobile broadband." However, I need it to "use mobile broadband by default and failover to wireline broadband."I have much better wireless broadband, but have a slow DSL line that I would like to use as a backup.Thanks!LB2120 Providing Private IP to device connected in bridge mode
My LB2120 is exhibiting some odd behavior. When I set it to bridge mode, it's supposed to pass the WAN IP to the connected device. It doesn't seem to be doing this. Instead, it provides a private 10.X.X.X IP to the device connected to the LAN port. This is causing me to be unable to setup port forwarding to devices inside my network. I'm not really interested in setting it back to router mode if I can avoid it as that would cause dual-NAT. I'd like to stay away from dual-NAT as that will cause me additional issues. Any ideas on how to get the Netgear to pass my public IP to my device instead of the private address?LB2120 Bridge mode, not passing dynamic IP to router
Hello, I am using the LB2120-100-UKS which i have just received from new and wanted to use the bridge mode with a TL-R470+ load balancing router. I am connecting ADSL via the TL-R470+ with no issues (PPPoE in UK). The LB2120 is working well in both router and bridge mode with a PC (direct connection, no routers or switches, PC just set to obtain address automatically). In router mode, i get an IP in the range of 192.168.5.x as i would expact. In bridge mode, i get the WAN IP which is shown in the mobile 4G status window from the LB2120, so i know the (W10) PC is picking up the dynamic 4G IP address. If i restart the modem, it may (not always) get a new IP and the PC picks this up no issues. When setting the WAN port i intend to use for 4G on my TL-R470+ to "dynamic" the poor thing just sits forever and tries to connect with no success at all, looks like it never receives an address. If i set the "Static" and i enter what i noted from a succesfull PC connection, then the TL-R470+ makes a sucesfull connection to the LB2120 and i get 4G internet. Whats more, the load balancing works, and i get the benefit of the ADSL (slow but unlimited) and the 4G (fast but limited). So i know the system works as i want however i cannot use a static WAN IP on my 4G connection. My carrier, EE, wont offer fixed IP address on the consumer data tariff i have, so every few hours, or after a reboot, i would need to manually find the new IP, default gateway & DNS and update the details on the TL router so it can connect. I can only imagine that the router is getting confused as it "sees" both the 192.168.5.1 of the router admin page and the WAN IP and it cannot pick which to settle onto. Or perhaps it only sees 192.168.5.1 and its waiting on an IP assignment. How can i get around this? Is it a fault with the TL-470+ router, or the LB2120. Posts on other LTE models suggest this issue has been known for some time with any router. I can get it to work with the LB2120 in router mode, and the TL470+ in dynamic (i would probably pick static outside the DHCP pool to avoid conflict) and it gets an IP in the 192.168.5.x range but then double NAT is probably not always a good idea. This does at least mean the LB2120 takes care of the 4G WAN IP by ittself and i dont need to worry about it. Any help would be apprecaited. Thanks, Stuart