NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
ReadyNAS RN212: No Firmware Updates, No EOL Notice
The firmware for the ReadyNAS RN212 has not been updated for a long time. At this point, I no longer expect any functional improvements. https://www.netgear.com/support/product/rn212/ However, what I want from NETGEAR is a clear announcement regarding whether or not security issues, if discovered, will still be addressed. If the product is completely unsupported, that should be clearly stated as well. Typically, when a product reaches End of Life (EOL), it is explicitly noted in red text on the firmware page. The issue here is that there is no such indication, yet the firmware has not been updated for an extended period, and there has been no official announcement whatsoever.Configure NAS
Hi everyone, I´ve been using a shared hard disk in my local network and this is my very first time using a NAS and I cannot find the way to configure it. It´s been a couple of days since I´ve been setting it up but there is nothing else I can do. I have tried a couple of possible solutions but nothing worked so I am going to tell what I have done and see if you can help me. am using the hard drive I used for local network, and I just want to let you know that I only store movies on it so I don’t use it that much and it has got more or less a year since I bought it. So, I formatted the hard drive which is a Seagate ST2000DM001 and inserted in the chamber 1 of the NAS. After turning it up it did nothing, I wasn´t able to find it in the Ready Cloud web page, also pressed the backup button for 5 sec. and nothing. I also downloaded the RAIDar programme and still the same. As I remembered I set to my tech a static IP so I thought it would be because of that so I set the NAS with the 192.168.1.10 to the eth0 and 192.168.1.11 to the eth1. I do have the NAS connected the router my internet provider gave as I also have a switch and thought this could cause some issues. I can ping the ip from my PC sending 4 packages and receiving them too, I have also tried looking up they IP through the browser and nothing. So, I thought it would be a problem with the hard disk so I decided to formatted using this manual selection Factory default and leave it "think” for 30 min; useless.Right now, it has the power button blue and the rest are off. I´m also going to post some photos as they may be useful. Any help is welcome and thanks in advanced.
Netgear NAS 102 "offline"
I have been running my ReadyNAS 102 for nearly 3 years with no issues. Recently I can no longer access the NAS remotly using readycloud log in. The drive always shows off line. Also, with my Windows 10 laptops I can see the drive and drive folders, however when I click on them they ask for log in credentials. Ive tried adding a windows credential with the log in and password for the NAS, but that did not work. Ive also tried rebooting my modem, the drive, updated firmware, etc. Any suggestions?
ReadyCLOUD Services offline
Hello all, I am suffering from an issue which a lot have in the past but cannot seem to solve it whatsoever, details below; Model: ReadyNAS 104 Firmware 6.4.1 Environment: my office with 40mbps ethernet connection. The issue is that I have a static IP connection to my NAS and DNS server settings as below but I cannot seem to enable or access ReadyCLOUD services whatsoever, screenshots to follow; I have researched extensively and have not yet managed to get it working, from my limited knowledge about NAS, I tried changing the DNS settings many times yet to no avail. I also tried rebooting yet it made no difference whatsoever. I also tried a Safari and Chrome as browsers and yet did not make any difference. I appreciate your help and thank you in advance, have a great day.
