NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Plex
29 Topics
Cannot install application
Hi, I was running Plex 1.12.2 on ReadyNAS 6.9.2. Today I went to install Plex 1.13.0 via the ReadyNAS web interface, however I receive the error message “Cannot install application plexmediaserver-ros6-binaries”. It had already come up with the usual app install window and churned around for a bit and uninstalled the old version. So I rebooted the ReadyNAS and it’s the same - still can’t install it. I then decided to upgrade the ReadyNAS firmware to 6.9.3. After rebooting I then went to install Plex again but still “Cannot install application plexmediaserver-ros6-binaries”. Thinking I was fortunate I noticed that I had the old Plex download on my hard drive, but alas that won’t install either. plexmediaserver-ros6-binaries_1.13.0.5023-31d3c0c65_amd64.deb plexmediaserver-ros6-binaries_1.12.2.4929-29f6d1796_amd64.deb So as of now I can’t install either version? Any suggestions gratefully received! ReadyNAS is far from full - it’s got 2.4TB free.
Is PLEX compatibile with ReadyNAS 420 Series
Neither ReadyNas RN422 nor 424 are the PLEX compatibility list. Yet PLEX is listed in the Add-on Applications section of the ReadyNAS 420 Series. If one also consider that RN31X models are on the PLEX compatibility list it looks really strange that the 420 Series is not compatible. Cannot understand if is only a problem of updating the list, or if there is some real issue. Does anyone know if PLEX runs on a RN424?Solved
ReadyNAS 104 no accessible after to upgrade 6.9.1 and update PLEX
Hi all, The first thing is to say thank you very much in advance for your help. I have a RN104 since Nov.2015 with 4x6TB in RAID 5 (almost full) with both LAN connected with 2 IP. I upgraded the software to 6.9.1 at the begining of December and it was working ok but at the end of Dec I upgraded the APP Plex and it causes a problem in my RN. It is not accesible from any computer (Windows/Windows Explorer or Mac/Finder) it is visible but no accesible to any folder and also other folders are new in the root (admin, data and home) Plex is not detecting the Ready NAS Media Server and it is not possible to see nothing in Plex. NAS is accesible in the Admin page and all disk are working ok and also accessible in RAIDar 6.3.0 Ping from Mac with positive feedback. No working in ReadyCloud - Message is NAS doesn't have connection. What I have tried is: -first to reinstall Plex before to be aware the NAS is not accesible (many times but not possible to install). - I decided to reinstall Firmware from Boot Menu - I reinstall 6.9.1 from admin page - I dowgraded to 6.9.0 from admin page - I upgraded to 6.9.1 from admin page ... but nothing worked I really appreciate your help on this because a lot of info in my NAS I would like to preserve ... I am sending also the logs to the email. PS. Sorry about my English (I am from Spain)...4.9KViews0likes22CommentsInstalled App not showing up on Installed Apps list
I recently installed a ReadyNAS firmware update. After installation it my Plex Applcation did not show up on the installed Apps list. In addition it does not show up in the Available Apps list. The App is running and I can see it remotely, however there is an update to the Plex App but I am unable to install it because I cannot see it on my Installed Apps or Available Apps. Currently running ver 6.9.1. How do I get ReadyNAS to recognise that Plex is installed?Unable to install or uninstall any apps
This issue has been going on for quite a while now, through multiple OS updates. Currently running ReadyNAS OS 6.7.4. I can't install or uninstall any new apps via the admin console. It seems to download them just fine, but when it's working through the actual installation process it tells me it's unable to install or uninstall the package. Mainly, I'm trying to update Plex. Even downloading from the Plex website and uploading via admin console, it says it can't install the package. I've tried restarting, I've tried waiting for the next OS upgrade... nothing. I've already backed up my database files with WInSCP (backed up my couchpotato settings as well, as that's been inoperable for a while) and if all else fails I'll manually install via command line... but I'd REALLY like to fix it the right way.9.4KViews0likes20CommentsPlex Media Server fails to start on ReadyNAS 312
After a recent install of the latest package on my ReadyNAS 312 using the shell and installing the latest postgresql, my plex server fails to start. It fails to start from the app-page on the admin site, and if I try to start it manually from the shell I get the following message: root@NAS-Athena:/# systemctl start fvapp-plexmediaserver.service root@NAS-Athena:/# systemctl enable fvapp-plexmediaserver.service root@NAS-Athena:/# systemctl status fvapp-plexmediaserver.service● fvapp-plexmediaserver.service - Plex Media Server Loaded: loaded (/lib/systemd/system/fvapp-plexmediaserver.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Sat 2017-10-07 14:20:52 WEST; 1s ago Process: 22549 ExecStart=/bin/sh -c /apps/plexmediaserver/Binaries/Plex\ Media\ Server (code=exited, status=134) Process: 22544 ExecStartPre=/bin/sh -c /usr/bin/test -d "/apps/plexmediaserver/temp" || /bin/mkdir -p "/apps/plexmediaserver/temp" (code=exited, status=0/SUCCESS) Process: 22540 ExecStartPre=/bin/sh -c /usr/bin/test -d "${PLEX_MEDIA_SERVER_APPLICATION_SUPPORT_DIR}" || /bin/mkdir -p "${PLEX_MEDIA_SERVER_APPLICATION_SUPPORT_DIR}" (code=exited, s tatus=0/SUCCESS) Main PID: 22549 (code=exited, status=134) Oct 07 14:20:52 NAS-Athena systemd[1]: fvapp-plexmediaserver.service: Unit entered failed state. Oct 07 14:20:52 NAS-Athena systemd[1]: fvapp-plexmediaserver.service: Failed with result 'exit-code'. Anyone any clue how to solve this? Or even what might have caused this? I've tried uninstalling plex (both initially from the app page and rebooting and then uninstalling from the shell) - neither seems to resolve the issue. Thanks for any help given.Solved5.1KViews0likes5Comments
Plex Broken after upgrade to 6.7.3
Hi, i upgraded to 6.7.3 after the update i'v had some issues: - i am unable to start plex server - unable to remove plex server - web interface doesn't always work on windows 10 (ie, firefox, chrome) mac works perfect does anyone have a fix for this issue? kr, MattiasSolved9.9KViews0likes10CommentsPlex media server install to RN102 failing even after manual uninstall / package dependency problems
I had similar issues to this closed post here: https://community.netgear.com/t5/Current-NETGEAR-and-Partners/Plex-app-un-install-borked-and-un-able-to-complete-un-install/m-p/1049997#M4547 So I followed the steps, SSHd in and removed the /apps/plexmediaserver directory. However, when trying to install the Plex Server binaries from the Plex download site, I now get a 'cannot install' error: System: Cannot install application plexmediaserver-ros6-binaries_1.5.5.3634-995f1dead_armel.deb. Worth noting that I tried to use apt-get -f install - but I'm getting error below. root@ReadyNAS:~# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libdbi-perl libgcc1:armhf Suggested packages: libclone-perl libmldbm-perl libnet-daemon-perl libsql-statement-perl The following NEW packages will be installed: libdbi-perl libgcc1:armhf 0 upgraded, 2 newly installed, 0 to remove and 50 not upgraded. Need to get 0 B/851 kB of archives. After this operation, 2,435 kB of additional disk space will be used. Do you want to continue? [Y/n] y debconf: delaying package configuration, since apt-utils is not installed dpkg: error: parsing file '/var/lib/dpkg/status' near line 8261 package 'readynasos': multiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkg E: Sub-process /usr/bin/dpkg returned an error code (2) Can anyone help? All the best, StephenSolved9.5KViews0likes10CommentsPlex - adding third party channels.
I have successfully installed Plex from the admin interface. I've set up the folders for scanning and the system stems to be working correctly. I've placed my music there, and can access it from external plex players. I did the default installation. (I say that to say it appears to be working fine.) I would like to add third party channels. Is there away to use the ReadyNAS interface to drop the files in to the proper folder (with in the Plex install)? I have temporarilly enabled SSH, since this appears to be the only method. I have access, but it would appear the admin account does not have WRITE access to the proper folder. How do I change permissions, if this account doesn't have them already? Thanks in advance for any info. Rich
