NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
RN314
14 Topics
Cannot install Apps on 6.8.0
Any attempt on 3 different ReadyNAS's (just updated to 6.8.0 firmware), to install downloaded App .deb files results in "cannot read property 'childNodes' of undefined" error. Doesn't matter which app I try, always get the same problem. Using 'system/settings/install firmware' button and uploading relevant app .Deb file just downloaded from 'Apps/available apps/install'.
'Management service is offline' after 6.7.4 upgrade
I inadvertantly kicked off the firmware update to 6.7.4, and now although my RN314 has rebooted, and the display cycles between displaying ReadyNAS 314 6.7.4 and displaying the current state of a resync on the expansion volume (EDA500), I cannot access the Admin Page. The browser continually recycles at the end of the thermometer bar, and RAIDar lists "Management service is offline" as the status. (Both reflect Firmware: 6.7.4). I found an earlier thread and re-kicked off the firmware update, incase it hadnt completed - no change. I've downoaded the logs but don't even know where to start with the litany of files that that brought... Diagnostics is full of messages like: 2017-06-08 11:30:20: readynasd[21297]: segfault at 0 ip 0000000000484250 sp 00007fcd853e8750 error 4 in readynasd[400000+13b000] 2017-06-08 11:29:40: readynasd[20849]: segfault at 0 ip 0000000000484250 sp 00007f0f16ed0750 error 4 in readynasd[400000+13b000] 2017-06-08 11:29:05: readynasd[20303]: segfault at 0 ip 0000000000484250 sp 00007ff7cb7fd750 error 4 in readynasd[400000+13b000] Any suggestions?Solved7.7KViews0likes25Comments
Unable to set to Internet time?
I wonder if someone can tell me how to fix a little problem I'm having with my ReadyNAS314? I noticed today that it's time was about 50 minutes slow, so checked and it was set to sync with the Internet but it was still wrong. I temporarily set the time manually while I looked up some alternative time servers to try...but now I can't set it back to sync with the Internet. I check "Synchronize clock with an Internet server", put addresses in the dialog boxes and hit Apply, the dialog disappears but when I open it again, it's still set to manual!Solved7.3KViews0likes4CommentsReadyNAS 2nd factor authentication, Does anyone know if/or/how/when, ReadyNAS would support it.
HI, Does anyone know if/how/when/ ReadyNAS would be able to support 2nd factor authentication, with either a YUBIKEY with Yubico OTP, Oath-HOTP, Oath-TOTP, Challenge Response, FIDO U2F, or Google Authenticator, and if ReadyCLOUD and the Physical ReadyNAS already support Yubikey, can anyone point me to some documentation as to how to implement it please. (preferably want to use FIDO-U2F) Readynas OS 6.5.0, RN314Solved6.3KViews0likes7Comments
Ready Cloud problems.
Hi I'm not too competent but need help so treat me gently! We have a NAS drive rn314 in the office, been working for over a year fine and dandy. I know have sorted out backups and am going to look into the replicate function soon too. Currently I am having problems accessing over the internet using readycloud. I migrated my readycloud account to a mynetgear account. I log in and can see the graphic of the NAS drive, but it says there is no volume? I had an IT guy in to help me go through all of this and he could lo into it and see all the file structure o his (android) smartphone so I thought yay it works, I'm now at home and need som efiles but I am at a lose. Before we did anything we updats the firmware to 6.5.1 I think Any simple pointers? I have tried firefox and edge browsers. I am on a windows 10 laptop currently Thanks (I hope) Ross
ReadyNas 314 (6.5.0-T338 - Retry startup)
Hi, Parts of my shares stopped working, so I did a proper reboot of my ReadyNAS device. It now won't restart, every time it does it says 'Retry startup' I let it start fully, no shares work, the admin is un-usable. RAIDar - detects the two IP/networks whilst its about 50% booting until it then says 'Retry startup' It advises the info.. then it soon changes to ' Management service is offline ' . Neither IP works and is unresponsible to SSH in.. Very worried.. I have 9TB in this thing.. I have been getting emails the last fwe weeks stating: System volume root's usage is 92%. This condition should not occur in normal conditions. Contact technical support. This has been on-going, and I tried looking at it a while ago and did clena up some space, but it never went away... What can I try!!?4.3KViews0likes18Comments
RN314 locking on large backup jobs
I have been trying to backup one of the shares on my RN314 for the past 2 weeks and the box gets compleatly locked up when ever I try. OS verson: 6.4.1 Drive setup: (4) 1Tb Drives (Raid 5) Share setup: Protocals (SMB & RSYNC) Size (1.1Tb) Other backups to and from the divice via Rsync and Windows time stamp methods work just fine. I have also tried to pull data from this share to another destination useing windows to copy & useing microsoft Synctoy. All methods cause the box to lockup. I am unable to access the admin portal or any share on the divice via network sharing. This started to happen after OS 6.4.0 and continued with OS 6.4.1 Please Help...4.1KViews0likes14CommentsTiny Tiny RSS - Anyone got it working?
Hi, I'd like to get Tiny Tiny RSS working on my RN314 with fw 6.5.1 but can't find any information on its use on a ReadyNAS. I've downloaded v1.0.0 and v1.14.0 but both have me stumped. I put in the username, password and database name as directed but get the following when I hit "Test Configuration": Checking configuration Configuration check succeeded. Checking database Unable to connect to database using specified parameters. To be perfectly honest I've no idea what to do next. Any help would be appreciated. Thanks, dKRN 314 reports 2 fans
HEllo One more new bug after I upgrade to 6.6.1 on the RN314 of one of my customers, performances page shows 2 fans now and the second one report 0rpm, so readynas sent alerts all day long.! Very annoying. I'm pretty sure there is only one fan within a RN314, am I wrong ? Temperatures are OK and fan1 speed report normally, how can I disable this fantom fan ?3.6KViews0likes3CommentsReadyNAS Bonded Ethernet
I've recently purchase the RN314 and EDA500 unit. I would like to know can I bond the ethernet ports to a ProSafe 8-port Gigabit Ethernet Switch. I have around 10 TB of images I need to copy to the RN, will this halp in speed. In order words will bonding the ethernet ports give me 2 Gb network speed?3.6KViews0likes4Comments
