NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Nighthawk M1 battery charging problem
I have just bought a Netgear Nighthawk M1 through Telstra to enable working in the field. Plugged into the wallmount to charge and the battery seems to drain instead. It will only charge through USB which defeats the purpose of being completely mobile. There is a community discussion on this going back to 2014 but no obvious solution offered. Any suggestions?Netgear N600 as a repeater?
I have an Apple Time Capsule connected to my Arris SB6141 modem. I have an additional Netgear N600 router that I want to connect to my network and use it as a wifi extender while also being able to run ethernet cables from the ports to have wired connections in another part of my house. How can I set this up? I was wondering if they will all be on the name network and not create an additional wireless network also. Thanks in advance.
MR1100 – Nighthawk M1 Strict NAT on Xbox Issue
Hello, all. A few months back I purchased a unlimited data plan with at&t along with this hotspot in order to game on the Xbox One with it. So, I get on Xbox to find that I have a Strict NAT. I know many here would automatically point me towards a beginners guide on port forwarding but, that's my problem. I did that. I port forwarded everything it asked me to, I tried it both with a static IP and without a static IP. I reset my Xbox time and time again along with clearing the MAC address (After every change to the settings I the modem I made, I reset my Xbox and made sure to unplug it for at least a minute and drain the power block). Hell, I even tried to enable DMZ, knowing that it was dangerous and it STILL didn't open my NAT. My model of nighthawk has UPnP, but that doesn't work either for some reason. In the network settings of the Xbox it says the following: IPv4 NAT Type: Strict UPnP not successful xbox.com/xboxone/UPnP All services are available. I went to the link provided here and tried their method to make UPnP work. It didn't. I attached a screenshot of my attwifimanager page show what I did to port forward (I blocked out my static IP because I didn't know if it would be safe to share here) I would be grateful to anyone who could give me a STEP BY STEP for this model/at&t solution. Please tell me what I'm doing wrong because I've been trying to fix this for months.Powerline Adapter PLP1200 shows up as "unidentified connection"
I got my first powerline because I hated the wireless life. With the new powerline, I installed and prepared it using the instructions from the manual. After hold the security button for two seconds on each adapter, the power light is flashing like it should be and once every light turns green, the computer detects it as "Unidentified Connection". Also, looking at the Network Connections section I see a new device called "Ethernet" with "Realtek PCIe GBE family controler. While connected to the adapter, I am able to access SOME websites like google, youtube etc. I'm not even connected to my wireless! But if I were to goto a website like speedtest.net (I wanted to compare speeds between wireless vs wired vs powerline wired) it takes forever to "connect" and doesn't load/ connect to the page at all.