NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

rn102

17 Topics

RN102 fails to boot when one mirrored drive fails or is missing
Hello everyboby, I have been looking for a solution or help but was not able to find any hints regarding the following problem. I own a RN102 device equiped with two disk forming a X-RAID mirror. So far, so good. The RAID is healthy and looks fine. The last few days the device complained that disk2 is likely to fail. So I tried to replace the device by pulling the disk accordingto the handbook. At this moment the RN102 stucks an is not reachable anymore. When I reset the device, the poer LED keeps on blinking. RAIDAR is able to find the device but indicating the the is no configuration on it. The first disk is show as already used with data. When I put the second disk back an reboot the RN, it comes up fine and operates normally. It seems that the OS an it's config is missing on the first disk. Any idea how to get the corrected? Thanks to everybody. Greetings Chris
Solved
chris2531
Sep 22, 2017 Place Use your ReadyNAS
3.1KViews
0likes
19Comments
Replacing Hard Drives RN102 - Raid 0
If I'm replacing the hard drives in a Raid 0 configuration (upgrading from 2x2 to 2x8), does it require that I factory reset the NAS? I can't remember if I can just replace the drive and then go to the admin page and format them. Thanks,
Solved
Zonker
Aug 26, 2017 Place Use your ReadyNAS
1.4KViews
0likes
1Comment
Fan in fullspeed ( readyNAS 102)
Situation: - ReadyNAS RN102 F.W. : 6.8.0 - RAIDar: 6.3.0 Problem: The fan in my Nas is continious in full speed, While the dashboard says it's not working. The temperature of the HDD's is 32 degrees celcius, the processor 42 degrees. Looking for a solution............:-(
Naslok
Aug 20, 2017 Place Use your ReadyNAS
2.6KViews
0likes
4Comments
RN 102 permissions, unable to create/edit folders
Hoping someone can point me in the right direction here. I just noticed today that I am unable to create or edit files and folders on my ReadyNAS 102 device. It appears that I am able to access and read/write to the folders internal to the NAS but lost write access to the external devices (3 USB WD MyBook drives). I tried rebooting the NAS, and have looked at the permissions and nothing seems awry. The only recent change is I turned off anonymous access when granting cloud access to a friend earlier this week. I also suffered a power loss during a storm yesterday, but it was brief and nothing suffered any ill effects. I am re-enabling anonymous access to see if that makes a difference, but so far it has not. I have the three external devices mapped as network drives to my PC and when viewing them under File Explorer (Win10 Pro) the options to delete, make a new folder, rename, etc are all grayed out. Same if you right-click. Has anyone experienced this or know what else I should check? I have SMB enabled on all and the only change was the anonymous access. Any assistance is greatly appreciated.
Solved
jcsdkx51
Aug 14, 2017 Place Use your ReadyNAS
3.3KViews
0likes
2Comments
SMB disabled
I had been having a lot of issues with my ReadyNAS - initially I could not get a 'stable' file transfer for any sizable files using explorer (it would just hang after inactivity). However, it was at least working through the brower UI. Lately, even that stopped so I was left with no way to transfer files within folders on the NAS or externally. Aside from un-installing/re-installing SMB services on my Windows 10 PC, I tried disabling the services not being used (i.e. AFP and NFS) as I only access through windows. This however automatically completely disabled SMB and since then I cannot get SMB back to enabled. It just doesn't stay green in the settings no matter what I try. I've tried re-installing 6.6.1 many times now, and even upgraded to 6.7.0 beta 4 but nothing seems to work. Any help would be greatly appreciated. Thanks a lot
vmadan
Apr 15, 2017 Place Use your ReadyNAS
2.4KViews
0likes
5Comments
Request for review of basic backup plan RN10200 OS 6.6.1 (Newbie)
I really would appreciate some assistance by anyone who is familiar with backing up a NAS 102. What I need is a review of what I have done and any corrections necessary. My goal is to have an independent backup to avoid the loss of data on my NAS via ReadyCloud, as in the latest incident of March 30th. (I have very little experience with a NAS, so patience and good directions are necessary.) I use an iMac and have attached a 5GB USB3 drive to the top rear USB port of the NAS102, Firmware 6.6.1. It is formatted to NTFS. So here is what I have done: 1. Created a “backup” in the Admin section of ReadyCloud. 2. Backup “Data” share which contains all my shares to my USB HHD. 3, All is then backed up to the USB HHD and visible on the drive via ReadyCloud. Questions: 1. Is this backup scheme what I need to reach my goal? If not, detailed suggestions. 2. Can I disconnect the USB drive until I want to another manual backup? If so, is there a menu in ReadyCloud or Admin to safely eject the drive or can I just pull the USB connection? Location of eject, if there is one?(I can't find one.) 3. I am concerned that if I leave the drive connected to the NAS that ReadyCloud can “accidentally” delete my access to this backup as in the March 30th incident. Finally, I am concerned with leaving this drive on 24/7. Quality of the drive is not as good as my NAS HHD’s. 4. Finally, assume the NAS loses access via ReadyCloud, will the data on the backup be visible and usable if I plug the drive into my iMac or even a Windows machine which I can get access to? Thank you so very much in replying to this request. I know to the initiated, that this must seem mundane and the answers are buried somewhere in the forums. I’ve been looking through the forums and things can get real technical. Thanks again!
BadBob
Apr 10, 2017 Place Use your ReadyNAS
3.3KViews
0likes
6Comments
Spin down not working for second disk
Good morning, I know this question has already been discussed a lot, but i really did not found a solution for my problem. In my RN102, disk 1 spin down normally, but it seems to me the disk 2 never sleep. The log state spin down enabled for both disk, but only disk 1 has spin down / up events. I can clearly hear the noise (and notice the delay) of disk 1 that is spinning up, but this never happen with disk 2, data are always available even after hours of no access. I'm sure there is no access This happened with firmware 6.4.1, and also with the latest 6.6.1 Appended here a bit of spindown log. Any idea? Regards, Luciano Mar 11 18:40:28 nas-E6-1B-75 noflushd[2651]: Enabling spindown for disk 1 [sda,0:0:WDC_WD10EARX-00N0YB0:WD-WCC0T0273070:51.0AB15:] Mar 11 18:40:28 nas-E6-1B-75 noflushd[2651]: Enabling spindown for disk 2 [sdb,0:1:ST2000DM001-1CH164:W1F0XZKG:CC43:7200] Mar 11 19:37:17 nas-E6-1B-75 noflushd[2651]: Spinning down disk 1 (/dev/sda). Mar 11 19:37:29 nas-E6-1B-75 noflushd[2651]: Spinning up disk 1 (/dev/sda) after 0:00:10. Mar 11 19:57:30 nas-E6-1B-75 noflushd[2651]: Spinning down disk 1 (/dev/sda). Mar 11 19:57:42 nas-E6-1B-75 noflushd[2651]: Spinning up disk 1 (/dev/sda) after 0:00:10. Mar 11 20:17:43 nas-E6-1B-75 noflushd[2651]: Spinning down disk 1 (/dev/sda). Mar 12 01:53:08 nas-E6-1B-75 noflushd[2651]: Spinning up disk 1 (/dev/sda) after 5:35:22. -- Reboot -- Mar 12 01:59:11 nas-E6-1B-75 noflushd[2087]: Enabling spindown for disk 1 [sda,0:0:WDC_WD10EARX-00N0YB0:WD-WCC0T0273070:51.0AB51:] Mar 12 01:59:11 nas-E6-1B-75 noflushd[2087]: Enabling spindown for disk 2 [sdb,0:1:ST2000DM001-1CH164:W1F0XZKG:CC43:7200] Mar 12 02:02:03 nas-E6-1B-75 noflushd[2087]: Quitting on signal... Mar 12 02:02:03 nas-E6-1B-75 noflushd[3370]: Enabling spindown for disk 1 [sda,0:0:WDC_WD10EARX-00N0YB0:WD-WCC0T0273070:51.0AB51:] Mar 12 02:02:03 nas-E6-1B-75 noflushd[3370]: Enabling spindown for disk 2 [sdb,0:1:ST2000DM001-1CH164:W1F0XZKG:CC43:7200] Mar 12 02:20:26 nas-E6-1B-75 noflushd[3370]: Quitting on signal... -- Reboot -- Mar 12 11:20:54 nas-E6-1B-75 noflushd[2093]: Enabling spindown for disk 1 [sda,0:0:WDC_WD10EARX-00N0YB0:WD-WCC0T0273070:51.0AB51:] Mar 12 11:20:54 nas-E6-1B-75 noflushd[2093]: Enabling spindown for disk 2 [sdb,0:1:ST2000DM001-1CH164:W1F0XZKG:CC43:7200] Mar 12 11:30:31 nas-E6-1B-75 noflushd[2093]: Spinning down disk 1 (/dev/sda). Mar 12 11:35:35 nas-E6-1B-75 noflushd[2093]: Spinning up disk 1 (/dev/sda) after 0:05:01. Mar 12 11:46:36 nas-E6-1B-75 noflushd[2093]: Spinning down disk 1 (/dev/sda). Mar 12 12:17:13 nas-E6-1B-75 noflushd[2093]: Spinning up disk 1 (/dev/sda) after 0:30:34. Mar 12 12:22:13 nas-E6-1B-75 noflushd[2093]: Spinning down disk 1 (/dev/sda). Mar 12 13:13:13 nas-E6-1B-75 noflushd[2093]: Spinning up disk 1 (/dev/sda) after 0:50:57. Mar 12 13:20:34 nas-E6-1B-75 noflushd[2093]: Quitting on signal... Mar 12 13:20:34 nas-E6-1B-75 noflushd[4032]: Enabling spindown for disk 1 [sda,0:0:WDC_WD10EARX-00N0YB0:WD-WCC0T0273070:51.0AB51:] Mar 12 13:20:34 nas-E6-1B-75 noflushd[4032]: Enabling spindown for disk 2 [sdb,0:1:ST2000DM001-1CH164:W1F0XZKG:CC43:7200] Mar 12 13:25:39 nas-E6-1B-75 noflushd[4032]: Spinning down disk 1 (/dev/sda). Mar 12 13:55:51 nas-E6-1B-75 noflushd[4032]: Spinning up disk 1 (/dev/sda) after 0:30:09.
LucianoBrentana
Apr 03, 2017 Place Use your ReadyNAS
3.3KViews
0likes
6Comments
SMB not active from time to time after power on
Hello After this RN102 was updated to 6.6.0 we sometimes have SMB access problems. This device is powered down every day using the internal timer service and is powered UP every night for backup purposes. Most of the time the readynas works all right but from time to time, no SMB access is possible. I have to connect to the GUI and go to parameters and I see there the SMB button and of course it is grey. I have to turn it to ON and it turns to green. SMB is operational then and the shares are available from the Domain. I cannot find any problem in the logs (smbd log says: STATUS=daemon 'smbd' finished starting up and ready to serve connections) This Nas uses AD for users and is connected to a very small domain, it has no add-ons, no cloud, and no exotic parameters, tested with or without antivirus, Only internal scheduler is used every day for shutdowns on power up. Have you any ideas of the problem and how to fix it, I don't want to revert to earlier OS as this is too much of a hassle. I cant sent the logs if needed. Thanks for help.
cero
Jan 25, 2017 Place Use your ReadyNAS
2.8KViews
0likes
11Comments
RN 102 cannot access frontview web admin
Hi folks, after a black out I cannot access the web admin of RN 102. I can SSH root into the box the shares are mounted and availavle usb external drives is not mounted I could update fw via ssh no problem, I am now on bet 6.6.1 t700 followed procedure for USB restore, no luck followed procedure for OS reintall, procedure was completed, but problem still there RAIDar is stuck in "management service is offline" What can I do? What logs can I check?
theluke79
Nov 26, 2016 Place Use your ReadyNAS
3.1KViews
0likes
3Comments
Need help: System volume root's usage is 100%
Dear community, I have serious issue with my ReadyNAS 102. Currenrly my ROOT volume usage is 100%, resulting in not being able to access the Frontview and all kind of instabilty in the accessibility of my shared locations and installed apps. Also my MEDIA volume has less than 5% capacity resulting in instability issues. Who can help and support me in getting this issue solved? Find enclosed my logs: Filesystem Size Used Avail Use% Mounted on udev 10M 4.0K 10M 1% /dev /dev/md0 4.0G 2.4G 1.4G 65% / tmpfs 249M 0 249M 0% /dev/shm tmpfs 249M 528K 248M 1% /run tmpfs 125M 0 125M 0% /run/lock tmpfs 249M 0 249M 0% /sys/fs/cgroup /dev/md127 462G 245G 216G 54% /Storage_2 /dev/md126 927G 762G 140G 85% /data /dev/md126 927G 762G 140G 85% /apps /dev/md126 927G 762G 140G 85% /home /dev/md127 462G 245G 216G 54% /run/nfs4/Storage_2/Documenten_2 /dev/md127 462G 245G 216G 54% /run/nfs4/Storage_2/Movies_2 /dev/md126 927G 762G 140G 85% /run/nfs4/data/Music /dev/md127 462G 245G 216G 54% /run/nfs4/Storage_2/Music_2 /dev/md126 927G 762G 140G 85% /run/nfs4/data/Pictures /dev/md127 462G 245G 216G 54% /run/nfs4/Storage_2/Shows_2 /dev/md126 927G 762G 140G 85% /run/nfs4/data/Transmission /dev/md126 927G 762G 140G 85% /run/nfs4/data/Videos udev 63155 392 62763 1% /dev /dev/md0 65536 65536 0 100% / tmpfs 63590 1 63589 1% /dev/shm tmpfs 63590 542 63048 1% /run tmpfs 63590 3 63587 1% /run/lock tmpfs 63590 9 63581 1% /sys/fs/cgroup /dev/md127 0 0 0 - /Storage_2 /dev/md126 0 0 0 - /data /dev/md126 0 0 0 - /apps /dev/md126 0 0 0 - /home /dev/md127 0 0 0 - /run/nfs4/Storage_2/Documenten_2 /dev/md127 0 0 0 - /run/nfs4/Storage_2/Movies_2 /dev/md126 0 0 0 - /run/nfs4/data/Music /dev/md127 0 0 0 - /run/nfs4/Storage_2/Music_2 /dev/md126 0 0 0 - /run/nfs4/data/Pictures /dev/md127 0 0 0 - /run/nfs4/Storage_2/Shows_2 /dev/md126 0 0 0 - /run/nfs4/data/Transmission /dev/md126 0 0 0 - /run/nfs4/data/Videos 4.0K /var/agentx 64M /var/backups 625M /var/cache 27M /var/cores 4.0K /var/ftp 210M /var/lib 4.0K /var/local 792K /var/lock 69M /var/log 4.0K /var/mail 11M /var/netatalk 4.0K /var/opt 12K /var/readydrop 2.0M /var/readynasd 0 /var/run 20K /var/spool 4.0K /var/tmp 8.0K /var/www 1005M total Any help is welcome! Cheers, Fremske
fremske
Nov 03, 2016 Place Use your ReadyNAS
3.1KViews
0likes
1Comment