NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Using another Orbi Router as a Satellite
Hello, Few things i know others have brought up but I will also. 1. Add Orbi Routers the ability to also connect as a satellite. For example many of us because both on the home and business version needed extra satellites but they were not available yet so we purchased extra sets with routers. The routers are doing nothing but stored, total waste of money. Yes we can make them AP but need to be hardwired, this was purchased for a wireless solution, not wired solution. If the next firmware can upgrade the routers to also go into satellite mode would be great or give us a firmware to upload to turn the routers into a satellite. We already spent to the money think it would be the right thing to do. Since both router and satellite are the same hardware. 2. Because of the limit satellites for the orbi pro it would be nice if the satellites from the orbi home were compatible. I think this has been the greatest stress and also the limit on how many satellites a router can support. This is a great platform but great limitations for my business I have Orbi Router 2 satellites and have the 2 ex8000 6xs connected to cover our warehouse and office and have 2 extra routers i cant do anything with other than hard wire. Still have dead space but at the point as a business i really dont want to waste more money just to buy combo orbi pros because of this limitation. I think if this can be worked up this will switch alot of business to use this great product. Also since both Nighthawk 6xs and 4xs are the same hardware as orbi can future firmware allow them to show up satellites? Thank you GTGFeature request (force a device to a specific Orbi)
I have one problem device that, for some reason, always chooses the Satellite Orbi instead of the Router Orbi, which is always the furtherest away from the device. The Router Orbi is by far the closer one to the device. I can reboot the network and the device will connect to the Router, but will eventually creep back to the Satellite for whatever reason. It's a stationary device (TV) and never moves. I'd like to request to have a feature implemented that will allow us to "force" or designate a specific device to a specific Orbi. I know they plan on releasing a firmware that will allow us to customize how the lights on top act (always on, etc), which I hope gets released soon! Also, a Guest Network feature would rock!Updated to V1.12.0.18, now Satellite will not sync, "Wireless AP: Off"
I just updated to V1.12.0.18, and now my Satellite will not sync. Everything was working fine on the previous version. I have power cycled both the router and satellite. Following this suggestion: https://community.netgear.com/t5/Orbi/Satellites-not-putting-out-wifi-signal-after-upgrade-to-v1-12-0/m-p/1321569#M9975 I manually re-updated the firmware on both the satellite and router. It made no difference. When the satellite boots up, I get a solid blue light. The satellite shows in the attached devices list of the router, but not as a connected satellite, just as a connected device. Logging into the Satellite shows it has the appropriate firmware, but it says both 2.4 and 5Ghz radios are disabled. They both say "Wireless AP: Off". Yet it says "Your Orbi satellite connection is up and running." I have tried syncing by pushing the sync button on the router and running downstairs and pushing the sync button on the satellite. I have not noticed any color change, but the router stops blinking pretty quickly, but the satellite just continues to happily blink white. I mean, 25 minutes later, it is still blinking. I then tried the "Add Orbi Satellite" menu item in the router page. After several minutes, it reported that the " Satellite setup failed". I know, I made a rookie mistake -updating firmware when I didn't have any serious problems. Not sure what I can do now - should I try to roll back to a previous version of firmware (unfortunately I trusted the process and didn't write down the previous version)? Should I factory reset both units and try this version again? Any suggestions will be appreciated. If I don't figure this out in a day I'll contact support.Satellte LAN ports not working?
I've got my router in the basement and the satellite above it on the main level to cover the 3rd floor. Satellite is connected with devices attached, but when I plug anything into the LAN ports, they don't get an IP. I requested a replacement kit from Amazon and got the new one set up, tested the LAN ports with the satellite 2 feet from the router once I got the router/satellite configured and the firmware updated on both to 1.4.0.18. Worked fine. Moved the satellte up to the middle floor, got it connected, devices attached through wifi...LAN ports not working again. My Arlo base station showed up on the wired list, but the Xbox One S and the blu-ray player won't connect via LAN. Did a bit of looking around and doesn't seem like anyone else has had the issue? I figure it's either software at this point since it's 2 different kits or I've got something configured wrong.
ORBI Satellites
I have ORBI Router and 2 Satellites. (6,000 square for home). I am noticing that certain things disconnect. My nest cams for one are going offline a lot. I have just recently disabled beaming after researching this. I hope that fixes it. I also have a WNCE2001 that hooks to my DirecTV box. It works in the day, but when the kids go to bed, it doesn't connect. I changed that today to a static IP. I am hoping that helps (blind luck). During this troubleshooting I noticed the satellites appear to be getting new IP addresses assigned to them a lot. I have noticed at least 4-5 IP changes. 2 Questions... Why are they changing so often? If I make them static, will that cause any issues?