NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Orbi RBR50 firmware V2.0.0.74. Does it support Gig down
I have the RBR50 with 3 satilights. I was getting roughly 275-280 down & 30 up when I had the 300/35 plan with my ISP. I've upgraded to the GIG down 50up plan and my Orbi speed dropped to 150 down but up upgraded to 50. I tried to check to see if I upgraded my speed past the orbi's capabilities and saw something that it supported up to 400 down. Is that correct or did I mis-understand (if that's a word)? So could my issue be caused by my web speed being being upgraded past the Orbi's abilities and is that why my speed has actually gone down after the upgrade? Hardwired test direct to a computer showed that the ISP is sending the upgraded speed. Older computer showed 380 down and Omex X setup hardwired was full speed. Also, I put the specs in the subject because the mobel tab wasn't working.RBS50 blinking white all the time
Hello, I was away from home for nearly a month and had my RBS50 shutdown while my RBR50 was still running. When I came back, I have reset the link between the router and sattelite but now even if the system detects properly the RBS50, this one is always blinking white. I have reset/resync/rebooted but it stills blinks while the RBR50 is perfectly fine. Both firmware are the same 1.12.0.18. Any idea ? Thank you.Orbi appears to be corrupted by auto update, won't boot
Hi, So, I have an Orbi Router that's worked fine since purchase in 12/16, but had a problem in the early morning of 5/4/17, and now crashes on boot. I can see the DHCP processes start to vend IPs on the LAN ports, but it crashes before it can start the WiFi process, with a blue then red ring light sequence. Yes, I've done the factory default, with no change. Is there a procedure to recover from a corrupted firmware load ? Also, I have the situation where the S/N for my unit was registered, and then the unit was returned. So far, support appears incapable of dealing with this. though I've emailed by purchase receipt. What's the most effective way to solve these 2 problems ? Thanks, Paul Moore