NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
update
9 Topics
RN104 6.7.4 update causing problems on 2 x RN104
We have updated 6 ReadyNas 104 devices today with firmware 6.7.4 to patch the recent documented Samba vulnerability and 2 unts are now not functionning. 1 is stuck at 99% booting an we are unable to revive it using the USB recovery. Another unit looks to keep crashing and although i can browse some of the the data (when it is up and running), 1 folder which is around 700GB just hangs accessing the data. Then the NAS looks to reboot as the Admin page shows the booting status bar. Both these NAS's had iSCSI LUN configured too, whereas some of the other devices i updateted successfully were SMB shares only, no iscsi. Has anybody else had any issues? Any help appreciated4.1KViews2likes6Comments
RN214 hangs at 99% booting after update to 6.7.4 (upnphttpd, rddclient failed, dba import failed)
After updating from 6.6.1 to 6.7.4 my RN214 hangs at 98% (first time) and now at 99% (with "upnphttpd.service" message). - I see "ReadyNAS Admin Page is offline" in browser. - Raidar shows storage with "management service is offline" status. - Diagnostics shows just "Disk 3 has 1 Current Pending Sectors, Disk 3 has 1 Uncorrectable Sectors". - All windows shares are acceptable - LUNs doesn't work (i have VMWare virtual machine with attached iSCSI disk to system iSCSI disk, and that system stucks at bios screen). - Reboot doesn't help. - Reinstall OS doesn't help. - Storage has been purchased more than 90 days ago, so there is no complimentary technical support for now. - And, finally, i have no data backup, so i can't do factory reset (of course, i can copy all files from windows shares, but content of iSCSI-disks is much more important for me). Things I see in logs http.log Jun 05 12:28:25 LONDON apache_access[2301]: 192.168.10.139 "GET /admin/ HTTP/1.1" 200 Jun 05 12:28:27 LONDON apache2[2309]: [error] [client 192.168.10.139] Connect rddclient failed, referer: https://192.168.10.7/admin/ Jun 05 12:28:27 LONDON apache_access[2301]: 192.168.10.139 "POST /dbbroker HTTP/1.1" 200 Jun 05 12:28:30 LONDON apache2[2422]: [error] [client 192.168.10.139] Connect rddclient failed, referer: https://192.168.10.7/admin/ initrd.log [2017/06/02 19:19:39 UTC] Updated from ReadyNASOS 6.6.1 (ReadyNASOS) to 6.7.4 (ReadyNASOS). [2017/06/05 09:09:34 UTC] Updated from ReadyNASOS 6.7.4 (ReadyNASOS) to 6.7.4 (ReadyNASOS). mem_info.log MemTotal: 2065488 kB MemFree: 1453256 kB MemAvailable: 1876636 kB readynasd.log Jun 05 12:28:24 LONDON readynasd[18815]: Error rndb_import() ==> rc=3 Jun 05 12:28:24 LONDON readynasd[18815]: dba import failed Jun 05 12:28:25 LONDON readynasd[18871]: readynasd log started Jun 05 12:28:25 LONDON readynasd[18871]: readynasd started. (restarted=0) smdb.log [2017/06/05 12:19:19.881135, 2] ../source3/auth/auth.c:305(auth_check_ntlm_password) check_ntlm_password: authentication for user [Anton] -> [Anton] -> [anton] succeeded [2017/06/05 12:20:04.845425, 2] ../source3/auth/auth.c:315(auth_check_ntlm_password) check_ntlm_password: Authentication for user [Administrator] -> [Administrator] FAILED with error NT_STATUS_NO_SUCH_USER system.log Jun 05 12:28:27 LONDON apache_access[2301]: 192.168.10.139 "POST /dbbroker HTTP/1.1" 200 Jun 05 12:28:29 LONDON dbus[2026]: [system] Activating service name='org.opensuse.Snapper' (using servicehelper) Jun 05 12:28:29 LONDON dbus[2026]: [system] Successfully activated service 'org.opensuse.Snapper' Jun 05 12:28:30 LONDON apache2[2422]: [error] [client 192.168.10.139] Connect rddclient failed, referer: https://192.168.10.7/admin/ systemd-journal.log Jun 05 12:28:34 LONDON systemd[1]: Starting ReadyNAS System Daemon... Jun 05 12:28:34 LONDON readynasd[19085]: readynasd log started Jun 05 12:28:34 LONDON readynasd[19085]: readynasd started. (restarted=0) Jun 05 12:28:34 LONDON readynasd[19085]: DB (main) schema version: 23 ==> 23 Jun 05 12:28:34 LONDON readynasd[19085]: DB (queue) schema version: new ==> 0 Jun 05 12:28:35 LONDON readynasd[19085]: rndb_sql_get_scaler_mprintf is called with SQL which has vector output. (ncol=1, nrow=2). Jun 05 12:28:35 LONDON readynasd[19085]: SQL Error for SELECT FROM `group`. Jun 05 12:28:35 LONDON readynasd[19085]: rndb_account_import() ==> 3 (384ms)Solved6.8KViews0likes10Comments
Amazon Web Traffic Upon OS Upgrade Reboot
Hello, I completed the ReadyNAS OS 6.6.1 update and soon after rebooting and reviewing logs, there was an abundant amount of traffic talking to what appears to be Amazon over port 80 using the following IP addresses: 52.8.157.247 52.9.151.236 52.52.17.157 54.153.23.250 I was unsure of why my ReadyNAS was talking to Amazon, and if this is in fact Amazon, as there were many pages of log messages with these four IP addresses talking through port 80. I have a hunch that it may be AWS, but can never be too safe. Thanks.1.8KViews0likes1Comment
RN102 no longer starts up following failed update to FW 6.6.0
Hi, hope someone can help. I got a notification to update my firmware which I did, it then initiated a second update which was to 6.6.0. I don't think I'd updated for some time so it had to update to an earlier version first. The second update never completed, the power light just continued to blink slowly for over an hour until I decided to restart it by removing the power. It now does the same thing, power light blinking slowly. I've tried USB updating to 6.6.0 using a memory stick that has definately worked in the past for a firmware update on this device. As the 6.6.0 udate didn't seem to complete I tried the 6.5.2 update too but no change. When trying the perform the update the lights on the RN102 flash rapidly and the USB stick shows acticity briefly then stops. Any suggestions would be much appreciated, I use this for NAS for work so I'm in a bit of a predicament! Thanks in advance for any help.Solved4.4KViews0likes2CommentsPlex Updated and lost my liberys...but
Yesterday my Plex app updated on my ReadyNAS 214, however my library and metadata are no longer there and had to create a new server....but when im in plex choosing a folder i can see in the /app folder and see that my old plex media server folder is still there with all my Metadata, but im unable to access the /app folder in windows explore or in the NAS admin page. how do i turn on hidden folders within the NAS so i can copy my data over to the other folder that aperantly Plex decited to make?Solved5.6KViews0likes14Comments
[OS6 ARM] Readynas and impossible update
Hello. On my ARM based ReadyNAS, it's impossible to validate update. If I do a manual or automatic update, the device remains in OS6 6.2.4, and I have this warning on every logon... Is there a tip to update (force) it with a SSH connection ?2.8KViews0likes5CommentsReady NAS 314 stops at "booting"
Hi, today I updated the FM to 6.4 which worked fine I think. Then I tried to install the Wiki (App). This made the NAS unaccessable from the browser (files were still more or less accessable). Then I tried to restart it and it stopped during boot, saying "booting" and the PowerLED is blinking. I tried to reinstall the OS but it still stops when booting. Any ideas what else I can try? I will now check the disks and the HDDs. Is it possible to do a factory reset without the disks and without loosing data? I have 4x2TB disks, how would I backup them? Thanks a lot for any suggestions! PhilippSolved3.2KViews0likes2Comments
nas104 firmware update - all my local users disappeared
I updated firmware for NAS 104 from v. 6.2.5 to 6.4 and now all my local users disappeared. I also can’t find sw user manual for v.6.4 (or is the same as 6.2 March edition)? Where can I store my settings before fw upgrade that l can import setting if problems appears? Any help will be appreciated. Br, Tomi Aurednik2.7KViews0likes3Comments
