NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GSM7248v2 - Netwgear Manager not finding switch and cannot access GUI
Good morning,
I have several of these switched which I have no issues with but one is proving to be a real pain.
Basically, yesterday I needed to confiure Mirroring on one of its ports but wh...
Hi there,
I managed to get hold of a serial to usb adapter and and accessed the CLI interface. For some reason the IP had changed from 192.168.0.151 to a 169 address. I ran ezconfig and reconfigured the IP address etc and can now access it.
Many thanks
Hi Bodminman,
Welcome to the community! :)
Kindly try the steps below:
1. Disconnect the GSM7248v2 switch from the existing network.
2. Connect a PC directly to a LAN port to it. Then, assign a static IP address to the PC that is within the IP address range of the GSM7248v2 switch.
3. Check if you can ping the IP Address of the GSM7248v2 switch. If ever you are able to get replies, try to access its web-GUI.
Kindly answer the questions below:
a. What is the behavior of the LED lights of the GSM7248v2 switch?
b. Were you able to get replies and access the web-GUI of the GSM7248v2 switch after doing the steps above?
Regards,
DaneA
NETGEAR Community Team
Hi there,
I managed to get hold of a serial to usb adapter and and accessed the CLI interface. For some reason the IP had changed from 192.168.0.151 to a 169 address. I ran ezconfig and reconfigured the IP address etc and can now access it.
Many thanks
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
