NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
How to map or configure SAS ports with DAC cables in Netgear M4350 switch
We have 2 Netgear M4350 switches and connected with DAC cables (SAS ports / SFP+ DAC) to all devices like server and storage. How can we map the ports and configure the Netgear M4350 switches? ...
What exactly does this unknown (SAS) storage serving? Either it's SAS (pure block storage) or it's NAS so serving over a network connection (SMB, NFS, iSCSI). DAC can be used for SAN (SAS) or for NAS (Ethernet). To my knowledge, the Netgear switches are pure networking switches, not SAN switches.
Its actually Block storage not NAS, That is HPE MSA 1040
- With the MSA 1040 2-port 10GbE iSCSI Controller, it can certainly be configured for iSCSI, so kind of a NAS then. With the MSA 1040 2-port FC Controller it strict SAS only. As I said before, both variants might work with passive DAC. And again (at least to my knowledge) these switches are not SAS storage switches, but pure Ethernet only - despite both making use of the same connectors and cables.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
