NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Lowest cost smart or managed switch with console interface
Could someone recommend lowest cost smart or managed switch with console interface? I only need 4 ports but need to control over CLI, telnet or SSH.
no shutdown
telnet on port 60000
You don't get a prompt for the username, but type admin.
Then your password.
(Broadcom FASTPATH Switching) #show version
Switch: 1
System Description............................. GS108Tv2
Machine Type................................... GS108Tv2
Machine Model.................................. GS108T smartSwitch
Serial Number.................................. *****
FRU Number.....................................
Part Number.................................... BCM53312
Maintenance Level.............................. A
Manufacturer................................... 0xbc00
Burned In MAC Address.......................... *******
Software Version............................... 5.4.2.22
Operating System............................... ecos-2.0
Network Processing Device...................... BCM53312_B0
I was able to enter config mode and shutdown a port without problem.
I couldn't find an option to disable the service from the GUI, but you can very easily make an ACL if necessary.
Hi jak0lantash,
I was able to telnet (GS108Tv2) but I didn't get the same prompt as you: (Broadcom FASTPATH Switching) #show version
instead I am "> >" as follows:
(Broadcom FASTPATH Switching)> >
I type "date" command and get invalid input detected.
Do I need to login with a different account?
Thanks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
