NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear XS708e connecting to cisco Catalyst 2960
Hi guys I bought a Netgear XS708Ev2|ProSafe Plus 10G 8 ports switch to put it with our cisco network, but I am having trouble connecting it to cisco catalyst 2960 Is anybody work with this specific...
Thanks for your help... I did put T on the direct port toward cisco switch with PVID of 1 and a member of all vlan, and still not working... so i decided to put the netgear as a dump switch and put native vlan 5 on my cisco switch to point to the management ip address of the netgear which within a management subnet address... and works fine...
I am still looking on why it was not working with putting T on a port with PVID = 1 and All vlans.
but thanks again for your help.
Hi ikatutu,
Welcome to the community! :)
The port(s) on the XS708E that is connected to the Cisco Catalyst 2960 should be set as tagged (T) with a PVID of 1 and it should be a member of all VLANs.
As reference guide, click on the article below:
Setting up VLANs between Cisco and NETGEAR Switches
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
