NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear XS708e connecting to cisco Catalyst 2960
Hi guys I bought a Netgear XS708Ev2|ProSafe Plus 10G 8 ports switch to put it with our cisco network, but I am having trouble connecting it to cisco catalyst 2960 Is anybody work with this specific...
Thanks for your help... I did put T on the direct port toward cisco switch with PVID of 1 and a member of all vlan, and still not working... so i decided to put the netgear as a dump switch and put native vlan 5 on my cisco switch to point to the management ip address of the netgear which within a management subnet address... and works fine...
I am still looking on why it was not working with putting T on a port with PVID = 1 and All vlans.
but thanks again for your help.
Thanks for your help... I did put T on the direct port toward cisco switch with PVID of 1 and a member of all vlan, and still not working... so i decided to put the netgear as a dump switch and put native vlan 5 on my cisco switch to point to the management ip address of the netgear which within a management subnet address... and works fine...
I am still looking on why it was not working with putting T on a port with PVID = 1 and All vlans.
but thanks again for your help.
Hi ikatutu,
I'm glad to know that it works fine. :) I appreciate that you've shared what the steps you've done.
Since the problem is now resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR community looks forward to hearing from you and being a helpful resource in the future!
Cheers,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
