Forum Discussion

Tutor

Oct 16, 2017

Stacking ports on GS752TPS

I have three GS752TS connected in a stack configuration as below: Questions: 1. Is the bandwidth between the switchs 5Gbps or only 2.5Gbps? 2. Is it possible to use ports 49 and 50 (or any o...

Installation

Troubleshooting

JohnC_V

NETGEAR Employee Retired

Oct 17, 2017

Hi krobinson,

It will be depending on the module and cable that you are using to determine the bandwidth of the port. There are some modules that is working on 10G and 1G. You may check under System > Stacking > Advanced > Stack Port Configuration, if port 49 and 50 is possible to be set on Stack or Ethernet.

Regards,

krobinson
Tutor
Oct 18, 2017
The only ports available to change to/from stack are 51 and 52.

Is my stack bandwidth 5Gbs?
- JohnC_V
  NETGEAR Employee Retired
  Oct 18, 2017
  krobinson,
  
  If that is the case, then we can only use ports 51 and 52 for stacking and the stacking bandwidth: 5 Gbps (bidirectional).
  
  Here is the datasheet for reference.
  
  Regards,