NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

so_hemanth's avatar
so_hemanth
Aspirant
Oct 06, 2017
Solved

TFTP enable

How copy the running config from switch to TFTP server or vice versa how to push the config from tftp server to switch in CLI mode ( I am searching for commands)..?

 

Help me 
Thank you in advance..!!

  • so_hemanth,

     

    Welcome to the community! :) 

     

    You will need to create a script of your running configuration:

     

    (GSM7224P) # show running-config running-config.scr

     

    Then, upload the running configuration script from the GSM7224P switch to the TFTP server:

     

    (GSM7224P) #copy nvram: script running-config.scr tftp://<TFTP server IP address>/running-config.scr

     

    If you want to download the running configuration script from the TFTP server to the GSM7224P switch:

     

    (GSM7224P) #copy tftp://<TFTP server IP address>/running-config.scr nvram: script running-config.scr

     

    For more information, kindly read the following:

     

    Pages 269-271 of the M4100 Software Administration Manual here.

     

    Pages 371-374 of the M4100 CLI Manual here

     

     

    Regards,

     

    DaneA

    NETGEAR Community Team

2 Replies

  • DaneA's avatar
    DaneA
    NETGEAR Employee Retired

    so_hemanth,

     

    Welcome to the community! :) 

     

    You will need to create a script of your running configuration:

     

    (GSM7224P) # show running-config running-config.scr

     

    Then, upload the running configuration script from the GSM7224P switch to the TFTP server:

     

    (GSM7224P) #copy nvram: script running-config.scr tftp://<TFTP server IP address>/running-config.scr

     

    If you want to download the running configuration script from the TFTP server to the GSM7224P switch:

     

    (GSM7224P) #copy tftp://<TFTP server IP address>/running-config.scr nvram: script running-config.scr

     

    For more information, kindly read the following:

     

    Pages 269-271 of the M4100 Software Administration Manual here.

     

    Pages 371-374 of the M4100 CLI Manual here

     

     

    Regards,

     

    DaneA

    NETGEAR Community Team

    • so_hemanth's avatar
      so_hemanth
      Aspirant

      Dear DaneA,

       

      Thank you for the Suggetion.....!!

       

      Commands are working..

       

      With best Regards

      Hemanth.S

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More