NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

milp's avatar
milp
Tutor
Nov 28, 2020
Solved

Which SFP+ 10GB Transceiver do I need to connect to an Aruba switch?

I need to connect a M4300-24X24F over FO to an Aruba 3810M Switch. The distance is about 200m with OM4 50/125 μm.

 

The Aruba guy told me that he is using the following Transceiver: "J9150D Aruba 10G SFP+ LC SR 300m MMF Transceiver". I did not find much about the specs, though. 

 

What Transceiver do I need on our Netgear XSM4348S/M4300?

 

I would assume its the AXM761, but I am not 100% sure. Can someone confirm?

 

Thanks a lot

Dan

 

 

 

  • AXM761 should be right - LC Lucent Connector (all SFP/SFP+ have it), short range (SR), MMF multi-mode [50/125µm OM3 or OM4 so called laser optimized] fiber. What's not explicitly listed on both models is the 850 nm laser wavelength, de-facto standard on multimode fiber. 

     

    For a direct connection, you need a dual/duplex multimode fiber with at least OM3, or OM4 (both typically aqua) quality with dual LC connectors on bot ends (typically grey). OM1/OM2 62.5/125µm [typically orange] isn't sufficient - it won't make the distance required because of the 62.5µm core does not fit the Laser sender/receiver.

6 Replies

  • schumaku's avatar
    schumaku
    Guru - Experienced User

    AXM761 should be right - LC Lucent Connector (all SFP/SFP+ have it), short range (SR), MMF multi-mode [50/125µm OM3 or OM4 so called laser optimized] fiber. What's not explicitly listed on both models is the 850 nm laser wavelength, de-facto standard on multimode fiber. 

     

    For a direct connection, you need a dual/duplex multimode fiber with at least OM3, or OM4 (both typically aqua) quality with dual LC connectors on bot ends (typically grey). OM1/OM2 62.5/125µm [typically orange] isn't sufficient - it won't make the distance required because of the 62.5µm core does not fit the Laser sender/receiver.

    • milp's avatar
      milp
      Tutor

      Thanks a lot for the clarification, schumaku 

       

      Connection is 

      AXM761 --> orange patch cable (2m) --> PP --> OM4 (ca. 200m I think) --> PP --> orange patch cable (2m) --> J9150D Aruba Transceiver

       

      So I guess we are all good.

       

      Many thanks.

       

      Daniel

       

      • schumaku's avatar
        schumaku
        Guru - Experienced User

        Orange coloured patch cable stinks - can be anything from the FDDI to OM1 or OM2, wrong core diameter - check the printing on it. Patch cables must be OM3 or OM4. 

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More