NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Blocking IP range/subnet with ACL
I can only assume I'm missing something here... I want to block access to one VLAN from another whilst maintaining routing via the switch. Simple enough on the face of it.
I have set an IP ACL bound to the VLAN in question to block IP traffic to 192.168.0.0 255.255.255.0 but it does nothing. If I set the IP to 192.168.0.10 255.255.255.0 then I cannot ping the device on that IP, so the rest of my config should be fine.
Am I doing something wrong, or is this just not supported on this switch?
Firmware is updated to 6.3.1.11
3 Replies
Replies have been turned off for this discussion
- That helped, thanks. Wildcard netmask is needed, should have read the manual!
Hi RussU,
You're welcome! :) I am glad that it helped you.
Feel free to post your future concerns here in the community.
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
