NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Can't Access Admin Interface over LAG on XS716E
I have a XS716E 16 Port 10-Gigabit Ethernet Smart Managed Plus Switch with a 6 port LAG configured that is connected to a Cisco trunk. From a node on the Cisco, I can't access the admin interface of...
Have no more XS708Ev1/XS708Ev2XS716E in operation. Vaguley remember having had the very same problem on one or some of these models initially, however it was fixed with some firmware update later on. Must admit never had that many ports in a LAG, but up to two resp. four ports in a static LAG.
Is the firmware updated to the current version from https://www.netgear.com/support/product/XS716E#download ?
Communication on the VLAN trunk and the ports associated to the VLANs configured does essentially work - just the admin Web UI is causing issues?
Aware the XS716E does only support static LAG, no IEEE 802.3ad Dynamic link aggregation, 802.3ad with LACP) - is the Cisco configured accordingly?
Traffic gets passed perfectly over the trunk/LAG. (on all VLANs) I just can't connect into the web ui without being on a device connected directly to that switch.
Have no more XS708Ev1/XS708Ev2XS716E in operation. Vaguley remember having had the very same problem on one or some of these models initially, however it was fixed with some firmware update later on. Must admit never had that many ports in a LAG, but up to two resp. four ports in a static LAG.
Is the firmware updated to the current version from https://www.netgear.com/support/product/XS716E#download ?
No it's not - I found that a few hours ago. I'm going to update it later tonight and see what happens.
Thank you for pushing me in the right direction. Firmware was the problem. I updated it and now I can access the Web UI from the LAG.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
