NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS116Ev2 Port Mirroring and loss of mirrored traffic
I've recently set up port mirroring on my GS116Ev2 (firmware v. 2.6.0.24) and it works... at least for a little while. For some reason, and I don't have the exact amount of time involved, the mirrori...
Hi OverSeer,
Please try another port as Destination Port and see if you encounter the same issue. Also, check if CRC error counts increasing under Port Statistics.
Hi OverSeer,
Welcome to our community! :)
May I know if you are trying to get a packet capture on a mirrored port? How long are you trying to run the packet capture? It may only take about 30 seconds to get a packet capture.
Regards,
Not running a packet capture but a security monitoring device is attached to that port to get the feed of traffic for analysis.
Hi OverSeer,
Please try another port as Destination Port and see if you encounter the same issue. Also, check if CRC error counts increasing under Port Statistics.
Sorry for the long delay. I was able to get the port mirroring to work by hard reseting the switch *and* trying a different port. Something's just "up" with port 9 on my switch when it comes to mirroring for some unknown reason ¯\_(ツ)_/¯.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
