NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS716Tv2 suddenly Link Down
I have a GS716Tv2 which after a few hours shutsdowns some links. The link won't work anymore even after a powercycle the link stays down. Only after loading factory defaults the link is up again... ...
Retired_Member,
I just want to follow-up. Any updates on the status of your GS716Tv2 switch?
Regards,
DaneA
NETGEAR Community Team
Hi Jeroenst,
Welcome to the community! :)
Let us isolate the problem. Kindly answer the questions below:
a. Was everything working fine before?
b. Are there any recent changes made in the settings of the GS716Tv2 switch or changes made within your network setup?
c. Have you tried changing the ethernet cables on the links that shuts down on the GS716Tv2 switch?
d. How is everything connected? It would be best if you post a diagram of your detailed network setup.
e. What is the current firmware version of your GS716Tv2 switch?
Regards,
DaneA
NETGEAR Community Team
Retired_Member,
I just want to follow-up on this. We’d greatly appreciate your feedback.
Regards,
DaneA
NETGEAR Community Team
- After loading factory defaults and not enabling powersavings the switch keeps functioning fine. Next step is to enable powersavings again.
I'll let you know the results. Retired_Member,
Just following up again. Kindly answer the questions I posted so that we could isolate the problem.
Regards,
DaneA
NETGEAR Community Team
Retired_Member,
Thanks for the feedback. What do you mean by Point-to-Point? What devices are connected to the links that shuts down?
If ever another smart switch (or managed switch) is connected to the links that shuts down, its possible that STP kicks in to prevent loops if ever STP is enabled on the switches. What is the behavior of the port LED lights of the links that shuts down?
Regards,
DaneA
NETGEAR Community Team
- The port that shutted down was connected to a vdsl2 router (experiabox v10 which is a zte h369A).
The led on the port that shuts down are off and stay off until factory defaults are loaded. Powercycling doesn't turn on the port again. Also connecting another device doesn't enable the port again.
- Dear DaneA,
A. Do not know, i just got this switch
B. No
C. Yes, interface stays down, only loading factory defaults makes the port working again.
D. Point to point, nothing special.
E.
Model Name GS716Tv2
Boot Version B5.1.1.1
Software Version 5.4.2.30- The switch is now still working with eco modus enabled...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
