NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS728TP VLAN Routing What I am Missing
Hi, I've got a couple of VLAN's setup as a test but I am struggling to get routing between them working and I must be missing something simple. The setup is like this: ...
It turns out it was the Windows firewall blocking the pings! Doh.
Thanks for the help.
Hi Joe9090,
Welcome to the community! :)
Let me share the article below and use it as your reference guide:
VLAN Routing on NETGEAR Smart Switches
Regards,
DaneA
NETGEAR Community Team
Thanks for the info but that was the guide I used to do my setup from.
I double checked everything was correct on my Switch but I still couldn't ping a device on the other VLAN.
Kindly try to reboot the GS728TP switch and see if it helps.
Regards,
DaneA
NETGEAR Community Team
It turns out it was the Windows firewall blocking the pings! Doh.
Thanks for the help.
Thanks for the update and you're welcome. I'm glad to know that you were able to figure out what is causing the problem. :)
Since your concern has been resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Cheers,DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
