NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SRE
Jul 26, 2016Aspirant
GS728TS Stack issues with interfaces and LAG's
Hi, We have 2 x GS728TS switches (running firmware 5.3.0.26) connected together in a stack with dual stacking cables. There are 4 servers connected to the stack via LAG's. Each LAG consists o...
- Aug 18, 2016
Hi,
During an extensive maintenance window last night, I powered down and removed all power to both switches in the stack for around 5 minutes.
I then re-applied power to both switches and after allowing then to boot up, checked them and they now appear to be working correctly again.
I have just re-checked the switches (approx 8 hours later) and they are still working fine - no issues noticed or detected.
Regards
Shaun
SRE
Jul 31, 2016Aspirant
Hi DaneA,
Sorry for not getting back to you.
I have not been able to do this as yet as we are in month-end lock down and no changes are allowed until after the 8th August.
DaneA
Aug 09, 2016NETGEAR Employee Retired
Hi SRE,
Just want to follow-up on this. Were you able to do a packet capture using Wireshark then open an online case?
Regards,
DaneA
NETGEAR Community Team
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!