NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS748T Issue with DHCP filtering
Hi,
I have an issue with a freshly configured GS748Tv4, where DHCP filtering is not working as expected.
I enabled DHCP filtering and set port 50 as trusted, all other ports as untrusted. But whe...
Hi luas,
Let us isolate the problem. Kindly answer the questions below:
a. Was DHCP Filtering on the GS748Tv4 switch working before?
b. Is the DHCP server connected directly to port 50 (uplink port)?
c. How is everything connected? It would be best if you post an image or screenshot of your detailed network setup.
d. Have you tried to reboot the GS748Tv4 switch? If not yet, kindly try it then check if the same problem will occur.
e. Have you just newly updated the firmware of the GS748Tv4 switch to v5.4.2.30? If yes, I suggest you to perform a factory reset then reconfigure the settings from scratch and check if the same problem will occur.
Regards,
DaneA
NETGEAR Community Team
Hi luas,
Let us isolate the problem. Kindly answer the questions below:
a. Was DHCP Filtering on the GS748Tv4 switch working before?
b. Is the DHCP server connected directly to port 50 (uplink port)?
c. How is everything connected? It would be best if you post an image or screenshot of your detailed network setup.
d. Have you tried to reboot the GS748Tv4 switch? If not yet, kindly try it then check if the same problem will occur.
e. Have you just newly updated the firmware of the GS748Tv4 switch to v5.4.2.30? If yes, I suggest you to perform a factory reset then reconfigure the settings from scratch and check if the same problem will occur.
Regards,
DaneA
NETGEAR Community Team
Hi,
thanks for your reply!Right now, I can't reproduce it. I guess it was some issue with the notebook caching the address.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
