NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

DJDJDJDJ's avatar
DJDJDJDJ
Aspirant
Jul 22, 2020
Solved

How do I configure VLAN with Netgear GS308E and Edge RouterX

Hello,

 

I am trying to figure out how to configure VLANs on Netgear GS308E to work with Ubiquity Edge Router X. My current setup (as in the diagram) has two access points. AP1 is connected directly to the router and issues correct IP addresses for VLAN 1 (LAN) and VLAN 10 (Guest network). However, AP2 is connected via the Netgear switch. Through this AP, I can get IP address for VLAN 1 only. Guest connections are not issued any IP addresses.

 

I know that I need to configure VLANs on the Netgear switch. However, I can't seems to find any clear instructions on how to do that for this switch. Web GUI seems to show 4 different things you can configure under the VLAN menu.

 

Thank you for any help or pointers you can offer.

  • schumaku's avatar
    schumaku
    Jul 22, 2020

    For complex 802.1q VLANs configs use VLAN -> 802.1Q -> Advanced only.

     

    Add VLAN 10, 20, and 30 to the VLAN config.

     

    For the uplink port and the AP port, add VLAN 10, 20, and 30 as [T]agged.

8 Replies

Replies have been turned off for this discussion
      • schumaku's avatar
        schumaku
        Guru - Experienced User
        Jul 22, 2020

        For complex 802.1q VLANs configs use VLAN -> 802.1Q -> Advanced only.

         

        Add VLAN 10, 20, and 30 to the VLAN config.

         

        For the uplink port and the AP port, add VLAN 10, 20, and 30 as [T]agged.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More