NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Trouble with Computers connected through Phones on GS728TP
I have a site that has upgraded to fiber internet with hosted voice. The service provider has VLANS 10 (data) and 20 (voice) configured on their router. The computers at the site will be connecting b...
- I figured it out. The ISP did not fully configure the phones. They should have specified the VLID in the device once I did this the traffic started passing properly
Hi Citizen0135,
Welcome to our community! :)
I would like to know the VLANs that will be used for data and voice? Do you mean VLAN 10 and 20 are for data VLAN? How about for the voice VLAN? Basically, if you wanted to pass the data traffic to your PC, you may just need to assign the PVID to their corresponding DHCP server.
Example:
VLAN 10 - Office 1
VLAN 20 - Office 2
VLAN 99 - Voice
VLAN membership:
VLAN 99 - Port 1 - T
VLAN 99 - Port 2 - T
VLAN 10 - Port 1 - U
VLAN 10 - Port 2 - U
PVID Configuration (where you wanted it to have a DHCP request for your PC):
Port 1 - PVID 10
Port 2 - PVID 20
On this setup, port 1 will receive an IP from DHCP server of VLAN 10 and port 2 will be receiving from VLAN 20 as it was assigned to their corresponding VLAN.
May the solution help you. :)
Regards,
I figured it out. The ISP did not fully configure the phones. They should have specified the VLID in the device once I did this the traffic started passing properly
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
