NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

phipo_neo's avatar
phipo_neo
Aspirant
Nov 02, 2016

FVS338 firmware issue

hi, I've do many hard reset and i lost the firmware, the led test is always turn on. i not have a web access managing ! when i connect directly to the computer by eternet cable the IP adress of th...
Firmware
Hardware
JohnRo's avatar
JohnRo
NETGEAR Employee Retired
Nov 03, 2016

Hello phipo_neo,

 

Welcome to the community! 

 

It appears bricked, try resetting the router/firewall using the sequence below: 

 

  1. Push and hold the reset button for 30 seconds. 
  2. Turn off the unit, continue to hold the reset button for another 30 seconds. 
  3. Turn on the unit, and hold the reset button for 30 seconds more. 
  4. Release the reset button and let the unit boot normally. 

See if this will make any difference. 

 

Thanks,

phipo_neo's avatar
phipo_neo
Aspirant
Nov 04, 2016

hi,

i've found a program for upload the firmware : cutecom

but after spook with a friend this last tell me tha there are 2 memory flash

Now how i can to swap the firmware into the primary flash

 

Best regards

Philippe

  • phipo_neo's avatar
    phipo_neo
    Aspirant
    Nov 04, 2016

    my system tell me there no IP adress assigned

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More