NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Prosafe FVS114 Dynamic DNS provider page displayed as blank
Before updating the firmware from v1.1_11 I thought that I had the DDNS page available. After updating the firmware to v1.1_15 the page does not show up. It comes up blank. Is this a problem wit...
So this leads me to a followup question:
What piece of equipment that Netgear manufactures/produces that has an interface to www.no-ip.com web site?
I read the following concerning the FVS336Gv2 :
That FVS336Gv2 has no Dynamic DNS support which calls from the DDNS page ==> http://www.no-IP.com.
It does support the following though:
Dynamic DNS,
DNS TZO,
DNS Oray, &
3322 DDNS
As I have written in the previous post that the FVS114 does not support/point to http://no-ip.com, so the question is, is there a piece of equipment that Netgear manufactures/produces that has an interface to http://www.no-ip.com web site?
There was a previous post on this thread which points to a Netgear page that indicates that the FVS318Gv2 is the replacement for the ProSafe VPN Firewall FVS114.
Does the FVS318Gv2 or FVS318n equipment DDNS page have a pointer to http://www.no-ip.com?
Looking at the dynamic dns section on my FVS318N, I can say no, this unit does not support no-ip (at least on the firmware I'm on).
I just read about a TP-Link r600vpn that seems like it might. Check it out and see. I know where to get these under $50 brand new, so if can do what you want, PM me and I'll send you the link.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
