WAX214 Cannot Set Transmit Power

Question

2 WAX214 APs within property. Want to adjust transmit power for coverage as needed. Updated firmware to 1.0.3.3.

No issues with connectivity or dropping connections, but management window will not allow me to clear the Auto RF so I can select the transmit power pulldown for either 2.4 or 5GHz radios.

This seemed to be avaialble on OOB firmware.

Do I need to change the Location (country) so that I can manage the power settings?

Thanks in advance for any assistance.

ChristineT · Answer

Hello&nbsp;twelvexs
&nbsp;
I've asked&nbsp;JohnC_V&nbsp;&nbsp;to check on this and escalate the issue to our internal teams for further investigation.&nbsp;
&nbsp;
plemans&nbsp;, Thanks for the shout out! :-)
&nbsp;
JohnC_V&nbsp;&nbsp; - Please update this thread with your findings and offer any possible solution(s) if available.
&nbsp;
Cheers,
ChristineT
&nbsp;
&nbsp;

JohnC_V · Answer

twelvexs,

&nbsp;

As per checking, under firmware 1.0.2.3 release notes:

&nbsp;

New Features and Enhancements:

Now Auto RF is enabled always for both 2.4GHz and 5GHz radios. Manual transmit power selection is not supported.

This was also raised as a feature request for WAX214 to be able to change the transmission&nbsp;power manually.

&nbsp;

Regards,

&nbsp;

John

NETGEAR Community Team

twelvexs · Answer

JohnC_V&nbsp;&nbsp;Thanks for the reply. I didn't read that release note unfortunately as I went straight to the 1.0.3.3 firmware that's on the web here. That release didn't have that information.&nbsp;Thanks again and hopefully it's modification capability will be considered in a future firmware release.

plemans · Answer

Justs reinstalled my WAX218 to test it.I'm on firmware version 1.0.3.2 and it wouldn't work either.&nbsp;Upgraded to 1.0.3.3 and did a factory reset/reinstall but that didn't help either.&nbsp;&nbsp;&nbsp;BretD&nbsp;ChristineT&nbsp;

plemans · Answer

twelvexs&nbsp;Looks like transmit power control for wax214/218 was added on the latest firmware.&nbsp;
https://kb.netgear.com/000063931/WAX214-Firmware-Version-2-0-1-2?article=000063931
&nbsp;
https://www.netgear.com/support/product/WAX214.aspx
&nbsp;
&nbsp;
&nbsp;

Forum Discussion

WAX214 Cannot Set Transmit Power

5 Replies

Related Content

WAX214 transmit power

Transmit Power (TRP) setting in RAX43

https://www.netgear.com/support/product/wax214/

WAX214 - Connect Scanner Using WPS

WAP Wax214 speeds are too slow

NETGEAR Academy

ProSupport for Business