NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WAX214 VLAN set up Correctly?
I'm trying to set VLANs on my network based on SSID and can't seem to find out where things are going wrong. I have an SSID set on my WAX214 with VLAN Isolation activated and the VLAN ID set to 20. W...
Great, and that VLAN 20 is trunked (tagged) throughout the ZyXEL switch on the data path (switch ports) connecting the router and the Netgear Plus switch?
Now that I'm looking at it, the ports in question (2 and 7) are Tagged for VLAN 20 and Untagged for VLAN 1 on the Zyxel (which seems like not the correct configuration). I'll bet the problem is with the configuration of the Zyxel, because those should be Tagged for both in order for it to work, correct?
fattom23 wrote:
Now that I'm looking at it, the ports in question (2 and 7) are Tagged for VLAN 20 and Untagged for VLAN 1 on the Zyxel (which seems like not the correct configuration). I'll bet the problem is with the configuration of the Zyxel, because those should be Tagged for both in order for it to work, correct?In case 2 and 7 making up the trunk connections, sure, 7 needs to be tagged, too. Unfortunately, the ports are not labeled on the switch, so hard to say what is connected there. So best guess Yes 8-)
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
