NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WC7500 LATEST FIRMWARE 6.5.3.2 and wac720 & wnd930
Hi guys I have a wc7500 with firmware 6.0.1.0 , i want to upgrade to latest version 6.5.3.2. But before to go to 6.5.3.2 the article say to go to 6.0.1R.0 . But i am not able to find this version 6.0...
Hi leofezollari,
Welcome to the community! :)
Download firmware v6.5.3.2 here, it is a .zip file. You will need to unzip it then you will find the firmware v6.0.1R.0.
Since your 6 WAC720 and 1 WND930 access points are managed by the WC7500, the WC7500 itself automatically upgrades the firmware of the access points connected to it.
If ever you are using a network management software (such as NMS300) which monitors the WC7500, then you will need to use the MIB for the WC7500.
Regards,
DaneA
NETGEAR Community Team
UPDATE Please !!!
Hi leofezollari,
Welcome to the community! :)
Download firmware v6.5.3.2 here, it is a .zip file. You will need to unzip it then you will find the firmware v6.0.1R.0.
Since your 6 WAC720 and 1 WND930 access points are managed by the WC7500, the WC7500 itself automatically upgrades the firmware of the access points connected to it.
If ever you are using a network management software (such as NMS300) which monitors the WC7500, then you will need to use the MIB for the WC7500.
Regards,
DaneA
NETGEAR Community Team
Hi DaneA
Thanks for your help.
After i upgrade to 6.5.3.2 two of wac720 are in status : Firmware upgrade in progress > Ap is rebooting than gain the same status : Firmware upgrade in progress > Ap is rebooting .
What is have to do in this case ?
THen are not coming in status Connected like the others APs.
br
LEO
2 are on status MAJOR
Total AlarmsDevice Up Down Critical Major
Access Points 5 0 0 2 Clients 0 NA NA NA
Kindly try the fix that was done by the forum user on this forum thread (marked as the Accepted Solution). Observe then let us know the result.
Regards,
DaneA
NETGEAR Community Team
Hi DaneA
I don't understand where i have to apply these configurations :
"The problem seems to be fixed by adding option vendor 43 and having the vendor ID and IP in hexadecimal format so hopefully all is well."
I have access on Control panel of WC7500 controller .
Leo
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
